Different tone for 2 numbers

[Leonmeijer]

Hello,

 

I'm installing PBX for a company that have 2 phone numbers.

e.g. 123456 and 123789.

All incomming traffic comes via a Teles VoIP box from an ISDN line so there is 1 trunk that is Gateway (Outbound proxy).

Now I want the phones to ring tone 1 for the first number and tone 2 for the second number. WHere can I configure this?

[Vodia PBX]

I'm installing PBX for a company that have 2 phone numbers.

e.g. 123456 and 123789.

All incomming traffic comes via a Teles VoIP box from an ISDN line so there is 1 trunk that is Gateway (Outbound proxy).

Now I want the phones to ring tone 1 for the first number and tone 2 for the second number. WHere can I configure this?

 

Different ways: You can delegate that job to the phone; or you can employ a hunt group in front of the phone to set the ring melody.

 

I guess we should think about adding a settings for an extension just like for hunt groups and agent groups that specifies how to ring.

[Leonmeijer]

But how can I detect to which number the caller is calling in the hunt group?

[Leonmeijer]

But how can I detect to which number the caller is calling in the hunt group?

 

EDIT: Maybe via some regular expresion in "Send calls to:" in trunk setup?

[Vodia PBX]

EDIT: Maybe via some regular expresion in "Send calls to:" in trunk setup?

 

No, one hunt group for every different destination.... Okay, maybe not very practical. Probably it is easier to leave that part to the phone. What phones are you using?

[Leonmeijer]

I use SNOM 360 and SNOM 300 phones.

 

Well maybe you can add an option somewhere in trunk/domain/extension settings where you can set "Incomming number -> Melody" or an appart page "Tones" or something...