Jump to content

Flowroute IP Authentication requires prepending the tech prefix to the dialed number to look like this 12341234*13105551234@sip.flowroute.com

Telephonetic LLC

Recommended Posts

We are unable to find how to prepend the tech prefix to the dialed number as instructed by Flowroute per Flowroute's instructions. Notice there is an * between the tech prefix and the number in the example that shows the expected dialed number. Please advise how and where to do so:

IP Authentication

If you want to use IP-based authentication for your outbound calls, define your outbound allowed IPs below and configure your phone system to prepend the tech prefix to the dialed number as shown in the examples below. Format should be {tech_prefix}*{country_code}{phone_number}@{sip_proxy}

SIP Proxy us-west-or.sip.flowroute.com
Tech Prefix 12341234
Example: NANPA (USA) - +1 (310) 555-1234 12341234*13105551234@us-west-or.sip.flowroute.com
Example: International (France) - +33 1 5871 1234 12341234*33158711234@us-west-or.sip.flowroute.com
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...