Jump to content

Error 404 Not found


Tom Waterman
 Share

Recommended Posts

I have my PBX in the DMZ( I read the wiki article on this) and I can see my registration request hitting it and I can see the replies on my Snom M3 gateway. But my error is 404 not found and on the phone it says unknow sip account. Here is the sip trace from my M3 phone. I have 60 of these to deploy by weeks end! Thank you.

 

Sent to udp:172.31.3.10:5060 at 26/01/2009 12:10:26 (458 bytes)

 

REGISTER sip:172.31.3.10 SIP/2.0

Via: SIP/2.0/UDP 172.16.50.1;branch=z9hG4bKxyf.fzoxcxpecm9oyzah302ktx

Max-Forwards: 70

From: <sip:817@172.31.3.10>;tag=sfe862h1

To: <sip:817@172.31.3.10>

Call-ID: 8uh1h72ojm

CSeq: 160257 REGISTER

Contact: <sip:817@172.16.50.1>

Allow: INVITE, CANCEL, BYE, ACK, REGISTER, OPTIONS, REFER, SUBSCRIBE, NOTIFY, MESSAGE, INFO, PRACK

Expires: 60

User-Agent: snom-m3-SIP/01.22 (MAC=0004132A2F3D; HW=1)

Content-Length: 0

 

 

Received from udp:172.31.3.10:5060 at 26/01/2009 12:10:26 (243 bytes)

 

SIP/2.0 404 Not Found

Via: SIP/2.0/UDP 172.16.50.1;branch=z9hG4bKxyf.fzoxcxpecm9oyzah302ktx

From: <sip:817@172.31.3.10>;tag=sfe862h1

To: <sip:817@172.31.3.10>;tag=82a4ffb026

Call-ID: 8uh1h72ojm

CSeq: 160257 REGISTER

Content-Length: 0

Link to comment
Share on other sites

I have my PBX in the DMZ( I read the wiki article on this) and I can see my registration request hitting it and I can see the replies on my Snom M3 gateway. But my error is 404 not found and on the phone it says unknow sip account. Here is the sip trace from my M3 phone. I have 60 of these to deploy by weeks end! Thank you.

 

Sent to udp:172.31.3.10:5060 at 26/01/2009 12:10:26 (458 bytes)

 

REGISTER sip:172.31.3.10 SIP/2.0

Via: SIP/2.0/UDP 172.16.50.1;branch=z9hG4bKxyf.fzoxcxpecm9oyzah302ktx

Max-Forwards: 70

From: <sip:817@172.31.3.10>;tag=sfe862h1

To: <sip:817@172.31.3.10>

Call-ID: 8uh1h72ojm

CSeq: 160257 REGISTER

Contact: <sip:817@172.16.50.1>

Allow: INVITE, CANCEL, BYE, ACK, REGISTER, OPTIONS, REFER, SUBSCRIBE, NOTIFY, MESSAGE, INFO, PRACK

Expires: 60

User-Agent: snom-m3-SIP/01.22 (MAC=0004132A2F3D; HW=1)

Content-Length: 0

 

 

Received from udp:172.31.3.10:5060 at 26/01/2009 12:10:26 (243 bytes)

 

SIP/2.0 404 Not Found

Via: SIP/2.0/UDP 172.16.50.1;branch=z9hG4bKxyf.fzoxcxpecm9oyzah302ktx

From: <sip:817@172.31.3.10>;tag=sfe862h1

To: <sip:817@172.31.3.10>;tag=82a4ffb026

Call-ID: 8uh1h72ojm

CSeq: 160257 REGISTER

Content-Length: 0

 

If you are using Windows.

 

Try turning the Firewall off in the PBXNSIP computer.

 

Bill H

Link to comment
Share on other sites

Yeah that's what I thought. This is running on Server 2008 and I have disable windows firewall all together. I even stoppped the service. No luck.

I found out what it was. I had my domain name in the setting set as the FQD name but in the sip header I was sending the ip address. so I added the alias of localhost to the domain and it works like a charm.

Link to comment
Share on other sites

I found out what it was. I had my domain name in the setting set as the FQD name but in the sip header I was sending the ip address. so I added the alias of localhost to the domain and it works like a charm.

 

Yea, that is a good old problem. If you have only one domain, make sure that you have the name "localhost" either as primary name or as one of the alias.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...