OnNet calls giving 401 authorization required

[Parks]

We are just implementing our nextone switch and are going this while trying to call someone within our network. We run PBXnSIP in a hosted environment with many domains and they cannot call between each other.

 

Any suggestions would be great as we need to roll out ASAP. This is our last step.

[pbx support]

We are just implementing our nextone switch and are going this while trying to call someone within our network. We run PBXnSIP in a hosted environment with many domains and they cannot call between each other.

 

Any suggestions would be great as we need to roll out ASAP. This is our last step.

 

For call between domain, there is something called "Try loopback"under the dialplans. See whether that suffices your requirement.

[Parks]

For call between domain, there is something called "Try loopback"under the dialplans. See whether that suffices your requirement.

 

There isn't any loop back in the dial plains and that would only affect the dial plan. I found it after doing some real searching and it's called "Accept Redirect" to yes instead of the default trunk setting of no.

[Vodia PBX]

There isn't any loop back in the dial plains and that would only affect the dial plan. I found it after doing some real searching and it's called "Accept Redirect" to yes instead of the default trunk setting of no.

 

The "Try Loopback" is a kind of hack to deal with the situation that many installations realls just have one server and don't want to add anything to the installation. Once you are running multiple servers, you need to have something external that redirects trunk calls to other domains on other servers anyway.

 

You need to disable Loopback Detection (admin->settings) and you must have IP addres 127.0.0.1 on that server (which is no problem if you are running IPv4).