Jump to content

outbound call route


paljoe
 Share

Recommended Posts

Hi,

 

the default outbound call setup for CS 410 are hunting the free fxo port. what if i want to hunt only the 2 fxo ports. what will be my dial plan.

 

 

P.s.

 

I do know how to configure an outbound call route to only one specific fxo port. but what if fxo port 1 is busy and i want the system to automatically hit fxo port 2 but not including fxo3 and fxo4. Thanks in advance

Link to comment
Share on other sites

Hi,

 

the default outbound call setup for CS 410 are hunting the free fxo port. what if i want to hunt only the 2 fxo ports. what will be my dial plan.

 

 

P.s.

 

I do know how to configure an outbound call route to only one specific fxo port. but what if fxo port 1 is busy and i want the system to automatically hit fxo port 2 but not including fxo3 and fxo4. Thanks in advance

 

The PBX should automatically find the next available port. If a port is not connected or busy does not matter.

 

If you include the "line" parameter in the SIP URI, then the FXO gateway will stick to the line that you provide. For example, if you use "sip:\1@\r;line=1" in the replacement, then that dial plan entry will work only on line 1.

 

If you want to fail over to another line then you need to turn the failover on on the FXO trunk and add another line to the dial plan that uses another line. As for teh failover, it is okay to failover on 5xx codes. The dial plan then may look like this:

 

110 PSTN-Gateway * sip:\1@\r;line=1

120 PSTN-Gateway * sip:\1@\r;line=2

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...