paljoe Posted June 11, 2009 Report Share Posted June 11, 2009 Hi, the default outbound call setup for CS 410 are hunting the free fxo port. what if i want to hunt only the 2 fxo ports. what will be my dial plan. P.s. I do know how to configure an outbound call route to only one specific fxo port. but what if fxo port 1 is busy and i want the system to automatically hit fxo port 2 but not including fxo3 and fxo4. Thanks in advance Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted June 11, 2009 Report Share Posted June 11, 2009 Hi, the default outbound call setup for CS 410 are hunting the free fxo port. what if i want to hunt only the 2 fxo ports. what will be my dial plan. P.s. I do know how to configure an outbound call route to only one specific fxo port. but what if fxo port 1 is busy and i want the system to automatically hit fxo port 2 but not including fxo3 and fxo4. Thanks in advance The PBX should automatically find the next available port. If a port is not connected or busy does not matter. If you include the "line" parameter in the SIP URI, then the FXO gateway will stick to the line that you provide. For example, if you use "sip:\1@\r;line=1" in the replacement, then that dial plan entry will work only on line 1. If you want to fail over to another line then you need to turn the failover on on the FXO trunk and add another line to the dial plan that uses another line. As for teh failover, it is okay to failover on 5xx codes. The dial plan then may look like this: 110 PSTN-Gateway * sip:\1@\r;line=1 120 PSTN-Gateway * sip:\1@\r;line=2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.