Bill H Posted September 17, 2009 Report Share Posted September 17, 2009 We installed a CS-410 for a new customerand we have been having some troubles that we have seen before. The basic trouble at this point is no disconnection of internal calls. (maybe outside too / both PSTN and SIP Trunk) If a call is made from one phone to a mailbox, on the system, it connects OK but when the caller hangs up the call does not release. This was verified by looking at the "Calls" page of the PBXNSIP Admin GUI while the LED on the phone stays on. I traced it to a missing BYE Message last week so I updated the firmware in all the Aastra phones. That seemed to clear it up. But then this week it returns so I updated the firmware in the CS-410 to the most recent from PBXNSIP website. Still no disconnect. The odd thing is that I have a remote extension off of his system and it works OK 100% of the time. We are running everything through one port on the CS-410 (Wan with SIP Replacement) and I am wondering if this may be linked to the trouble. What are your thoughts?? Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted September 20, 2009 Report Share Posted September 20, 2009 If you are using the built-in FXO gateway, you may want to check that the hangup detection on the trunk is enganged. The gateway itself has a hard time detecting the hangup tone sometimes. Therefore we added this to the trunk setting. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.