Jump to content

Inbound PSTN trunk call


Steve-Alloy
 Share

Recommended Posts

Hi,

Can anyone elaborate on the below and perhaps give an example of what the below should look like in the invite

 

"The incoming call matches the IP address of the outbound proxy of that trunk and a DID number in the domain of the trunk " referenced from http://kiwi.pbxnsip.com/index.php/Inbound_Calls_on_Trunk

I have set this up before using different dial strings like the ones at the bottom of the referenced wiki page however for a large scale deployment (up to 500) what is the best way?

 

Any help is appreciated.

 

Thanks.

Link to comment
Share on other sites

Can anyone elaborate on the below and perhaps give an example of what the below should look like in the invite

 

"The incoming call matches the IP address of the outbound proxy of that trunk and a DID number in the domain of the trunk " referenced from http://kiwi.pbxnsip.com/index.php/Inbound_Calls_on_Trunk

I have set this up before using different dial strings like the ones at the bottom of the referenced wiki page however for a large scale deployment (up to 500) what is the best way?

 

The PBX really looks at the IP address on the IP packet itself, not in the SIP packet. In the SIP URI the IP address is not the point. Maybe that was the problem here.

 

But there are also other ways to match the inbound request, e.g. on the DID number or the used domain.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...