mattlandis Posted December 17, 2009 Report Share Posted December 17, 2009 I have a senario: When a remote caller calls in and comes in port 0/0 and they hang up, the call hangs up. When a call comes in port 0/1 and the remote caller hangs up, the calls stays... -We are using patton 4114 fxo gateway. -We are using 2 of the 4 ports. -i think both number are verizon. tx for you thots., matt Quote Link to comment Share on other sites More sharing options...
pbx support Posted December 19, 2009 Report Share Posted December 19, 2009 I have a senario:When a remote caller calls in and comes in port 0/0 and they hang up, the call hangs up. When a call comes in port 0/1 and the remote caller hangs up, the calls stays... -We are using patton 4114 fxo gateway. -We are using 2 of the 4 ports. -i think both number are verizon. tx for you thots., matt Does the gateway send sip BYE to the PBX when the remote caller hangs up? Quote Link to comment Share on other sites More sharing options...
mattlandis Posted December 19, 2009 Author Report Share Posted December 19, 2009 Does the gateway send sip BYE to the PBX when the remote caller hangs up? yes. matt Quote Link to comment Share on other sites More sharing options...
Carl Johnson Posted December 21, 2009 Report Share Posted December 21, 2009 Could be mis-configured disconnect settings, most US telco use a loop break to provide the disconnect signal (busy signal as well). See below for known working settings for DTMF and disconnects in about 10 cities around the US (all different telco's). profile call-progress-tone US_Dialtone play 1 1000 350 -13 440 -13 profile call-progress-tone US_Alertingtone play 1 1000 440 -19 480 -19 pause 2 3000 profile call-progress-tone US_Busytone play 1 500 480 -24 620 -24 pause 2 500 profile call-progress-tone US_Releasetone play 1 250 480 -24 620 -24 pause 2 250 profile tone-set default map call-progress-tone dial-tone US_Dialtone map call-progress-tone ringback-tone US_Alertingtone map call-progress-tone busy-tone US_Busytone map call-progress-tone release-tone US_Releasetone map call-progress-tone congestion-tone US_Busytone profile tone-set US map call-progress-tone dial-tone US_Dialtone map call-progress-tone ringback-tone US_Alertingtone map call-progress-tone busy-tone US_Busytone map call-progress-tone release-tone US_Releasetone map call-progress-tone congestion-tone US_Busytone .. Example of Port 3 on a 4114 we have interface fxo IF_CO3 route call dest-interface IF_PBXNSIP loop-break-duration min 300 max 1500 disconnect-signal loop-break disconnect-signal busy-tone ring-number on-caller-id mute-dialing use profile tone-set US Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.