Tim Rudy Posted September 24, 2007 Report Share Posted September 24, 2007 I have several trunks running with no outbound problems. Some trunks are Sip Registrations and some are SIP Gateway. All are multi-channel. I have been receiving calls from providers which use SIP registrations with no issues. I ported some numbers to a provider which uses the SIP Gateway method, added the DID's to the appropriate extensions and auto attendants and the calls are not being routed within pbxnsip. A quick check of the log file with level 9 turned on, indicates "Received incoming call without trunk information and user has not been found" What am I doing wrong? I am running 2.0.3.1715 (Win32) Office 35 Any advice would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted September 25, 2007 Report Share Posted September 25, 2007 Check out http://wiki.pbxnsip.com/index.php/Inbound_Calls_on_Trunk. When you are using the SIP Gateway mode, it is crucial that you are using the outbound proxy. The PBX needs to identify the trunk by the IP address, and for this purpose it uses the outbound proxy. Outbound proxy = inbound proxy. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.