lirees Posted December 14, 2010 Report Share Posted December 14, 2010 Hello everyone I am trying to configure the patton 4554 with firmware 5.6 without any result ... I tried to import the configuration file generated by the patton 3cx but the patton do not register! Where can I find a template configuration for firmware 5.6 and the snom one? thanks Quote Link to comment Share on other sites More sharing options...
mattlandis Posted December 14, 2010 Report Share Posted December 14, 2010 Here is the solution: http://windowspbx.blogspot.com/2010/12/patton-provides-free-pstn-gateway.html Matt Quote Link to comment Share on other sites More sharing options...
mattlandis Posted December 14, 2010 Report Share Posted December 14, 2010 oh,i see that is a bri. i haven't used this config tool for BRI yet myself. I've used it for the patton 4300 soo far and it worked brilliantly. I solicit feedback on this tool matt Quote Link to comment Share on other sites More sharing options...
lirees Posted December 14, 2010 Author Report Share Posted December 14, 2010 oh,i see that is a bri. i haven't used this config tool for BRI yet myself. I've used it for the patton 4300 soo far and it worked brilliantly. I solicit feedback on this tool matt I know this gateway configuration tools, it is very nice but only works with the PSTN device .. I try to find a gateway configuration tools for the patton bri but i found nothing Quote Link to comment Share on other sites More sharing options...
mattlandis Posted December 14, 2010 Report Share Posted December 14, 2010 I'm very interested in solving the BRI/PRI/ config issue too. Did you talk to Patton? If not i will talk to Patton and see if I can get us a solution to patton pri/bri/etc gateways. Matt Quote Link to comment Share on other sites More sharing options...
lirees Posted December 14, 2010 Author Report Share Posted December 14, 2010 I'm very interested in solving the BRI/PRI/ config issue too. Did you talk to Patton? If not i will talk to Patton and see if I can get us a solution to patton pri/bri/etc gateways. Matt I try to contact the patton support now Quote Link to comment Share on other sites More sharing options...
Happy Posted December 15, 2010 Report Share Posted December 15, 2010 I try to contact the patton support now If you still have configuration problems with the patton 4554, I could upload my config file to you. Firmware version 5.2. Quote Link to comment Share on other sites More sharing options...
lirees Posted December 16, 2010 Author Report Share Posted December 16, 2010 the support patton give me all the information to configure the SmartNode 4554 In this configuration file each bri is connected to snom One with a separate trunk, the bri0 on the port 5060 an the bri1 on the port 5062. (attencion ...enabled the snom One to listen on port 5062 and restart the PBX) Create 2 trunk and configure only the proxy address and the domain : ip-patton:5060 for the first trunk and ip-patton:5062 for the second trunk ... anything else this is the configuration file, i tested it with the firmware 5.5 and 5.6 without problem ****************************************************************** cli version 3.20 clock local default-offset +00:00 webserver port 80 language en system ic voice 0 system clock-source 1 bri 0 0 clock-source 2 bri 0 1 profile ppp default profile call-progress-tone defaultDialtone pause 1 1000 pause 2 200 profile call-progress-tone defaultBusytone play 1 200 425 -7 pause 2 200 profile tone-set default profile voip default codec 1 g711alaw64k rx-length 20 tx-length 20 codec 2 g711ulaw64k rx-length 20 tx-length 20 codec 3 g729 rx-length 20 tx-length 20 fax transmission 1 relay t38-udp profile pstn default profile sip default no autonomous-transitioning profile aaa default method 1 local method 2 none context ip router interface IF_IP_LAN ipaddress >>>IP-PATTON<<< 255.255.255.0 tcp adjust-mss rx mtu tcp adjust-mss tx mtu context cs switch routing-table called-e164 RT_ISDN_TO_SIP_0 route .T2 dest-interface IF_SIP_0 map_add_0 routing-table called-e164 RT_ISDN_TO_SIP_1 route .T2 dest-interface IF_SIP_1 map_add_0 routing-table called-e164 rt_ip_to_isdn mapping-table called-e164 to called-e164 map_add_0 map (.%) to 0\1 interface isdn IF_ISDN_0 route call dest-table RT_ISDN_TO_SIP_0 call-hold disable caller-name user-side-ringback-tone interface isdn IF_ISDN_1 route call dest-table RT_ISDN_TO_SIP_1 call-hold disable caller-name user-side-ringback-tone interface sip IF_SIP_0 bind context sip-gateway GW_SIP_0 route call dest-interface IF_ISDN_0 remote >>>IP-SNOMONE<<< 5060 local >>>IP-SNOMONE<<< 5060 early-connect early-disconnect address-translation outgoing-call request-uri user-part host-part to-header target-param none interface sip IF_SIP_1 bind context sip-gateway GW_SIP_1 route call dest-interface IF_ISDN_1 remote >>>IP-SNOMONE<<< 5062 local >>>IP-SNOMONE<<< 5062 early-connect early-disconnect address-translation outgoing-call request-uri user-part host-part to-header target-param none context cs switch no shutdown context sip-gateway GW_SIP_0 interface LAN bind interface IF_IP_LAN context router port 5060 context sip-gateway GW_SIP_0 no shutdown context sip-gateway GW_SIP_1 interface LAN bind interface IF_IP_LAN context router port 5062 context sip-gateway GW_SIP_1 no shutdown port ethernet 0 0 encapsulation ip bind interface IF_IP_LAN router no shutdown port bri 0 0 clock auto encapsulation q921 q921 protocol pp uni-side auto encapsulation q931 q931 protocol dss1 uni-side user bchan-number-order ascending encapsulation cc-isdn bind interface IF_ISDN_0 switch port bri 0 0 no shutdown port bri 0 1 clock auto encapsulation q921 q921 protocol pp uni-side auto encapsulation q931 q931 protocol dss1 uni-side user bchan-number-order ascending encapsulation cc-isdn bind interface IF_ISDN_1 switch port bri 0 1 no shutdown ****************************************************************** Quote Link to comment Share on other sites More sharing options...
espritle Posted December 29, 2010 Report Share Posted December 29, 2010 Hi all, I'm new with the Patton 4554 and have a problem on the config. How can I limit the calls to specific msisdn, which the patton will forward to the pbx. Can someone help me please Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.