Jump to content

Mediatrix 1204 - too many rings


Recommended Posts

We use PBXnSIP with an ITSP trunk, but we want PSTN backup.


We have configured a Mediatrix 1204 using a guide found via google and have 4 analogue lines attached to it, we can receive inbound calls via the mediatrix trunk without a problem, although when someone makes an inbound call on one of the analogue numbers, the mediatrix answers and you can hear 5 seconds of ring tone, then the PBX answers with 1-2 seconds of ring tone and then the phone rings.


Is there a way of shortening the amount of rings by the mediatrix before the PBX picks up and make the pbxnsip ring tone identical to what we have in the UK?

Link to comment
Share on other sites

Its OK, I have spoken to someone very helpful from http://www.elecfron.com/ who has taked me through changing the delay before the pbxnsip answers. It has gone from 8 seconds to less than 1 second. I have also found a .wav that matches the Uk ring tone, but when we use it it sounds very muffled. Am waiting for ver 2 so will try it after the u/grade.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...