Jump to content

No assistant when calling from cell phone


madis
 Share

Recommended Posts

I have configured cell phone number for extension under Redirection but when I call from this number then there is no assistant playing. Extension just starts to ring.

From log I see that snomone recognizes my cell phone.

 

Are there any other steps that need to be taken to make it work? SnomONE version is 2011-4.3.0.5020 (Win32) but it did not work also for version 4.2.

 

[8] 2011/11/16 03:57:52: Call from a trunk 1

[8] 2011/11/16 03:57:52: Trunk CR@localhost has country code not set, area code not set

[9] 2011/11/16 03:57:52: Incoming: formatted From is = "5295XXX" <sip:5295XXX@91.216.XXX.50>

[9] 2011/11/16 03:57:52: Incoming: formatted To is = <sip:825@78.110.XXX.195>

[9] 2011/11/16 03:57:52: Incoming: formatted URI is = sip:825@localhost;user=phone

[8] 2011/11/16 03:57:52: To is <sip:825@78.110.XXX.195>, user 23, domain 1

[8] 2011/11/16 03:57:52: From number 5295XXX is configured as cell phone for extension 825@localhost, display name Madis

[8] 2011/11/16 03:57:52: To user 825

[8] 2011/11/16 03:57:52: Send call to extension is not set. Route the call based on global number 825

[5] 2011/11/16 03:57:52: Global trunk CR@localhost sends call to 825 in domain localhost

[8] 2011/11/16 03:57:52: Call state for call object 17: idle

[7] 2011/11/16 03:57:52: set_codecs: for 62390b630a51dd2e3718577302ba60fe@91.216.XXX.50:5060 codecs "8", codec_preference count 2

[8] 2011/11/16 03:57:52: From number 5295XXX is configured as cell phone for extension 825@localhost, display name Madis

[8] 2011/11/16 03:57:52: Call state for call object 17: alerting

[8] 2011/11/16 03:57:52: Play audio_moh/noise.wav

[9] 2011/11/16 03:57:52: UDP: Opening socket on 0.0.0.0:56910

[9] 2011/11/16 03:57:52: UDP: Opening socket on 0.0.0.0:56911

[7] 2011/11/16 03:57:52: set_codecs: for b70c33f6@pbx codecs "", codec_preference count 2

[8] 2011/11/16 03:57:52: call port 34: state code from 0 to 100

[9] 2011/11/16 03:57:52: update_codecs for b70c33f6@pbx: adding codec pcma/8000 to available list

[9] 2011/11/16 03:57:52: update_codecs for b70c33f6@pbx: codec_preference size 2, available codecs size 2

[8] 2011/11/16 03:57:52: call port 33: state code from 0 to 100

[7] 2011/11/16 03:57:52: Set packet length to 20

[9] 2011/11/16 03:57:52: update_codecs for 62390b630a51dd2e3718577302ba60fe@91.216.XXX.50:5060: adding codec pcma/8000 to available list

[9] 2011/11/16 03:57:52: update_codecs for 62390b630a51dd2e3718577302ba60fe@91.216.XXX.50:5060: Other side does not support codec telephone-event/8000

[9] 2011/11/16 03:57:52: update_codecs for 62390b630a51dd2e3718577302ba60fe@91.216.XXX.50:5060: codec_preference size 2, available codecs size 1

[8] 2011/11/16 03:57:52: Play audio_en/ringback.wav

[8] 2011/11/16 03:57:52: call port 33: state code from 100 to 183

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...