Phil Smith Posted February 12, 2013 Report Share Posted February 12, 2013 I am trying to setup a Snom One Mini with a Sangoma Vega 50 using the PSTN. I have a non-registering SIP trunk between the 2 and can make outbound calls and internal calls however when an inbound call is received, it seems to be passed from the Sangoma Vega to the Snom One but returned to the Vega with a 404 error. Does anyone have any experience of configuring these devices? The tech support guy at Sangoma seemed convinced that it was something in the Snom that was causing the issue. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted February 12, 2013 Report Share Posted February 12, 2013 There is information about how to handle inbound calls on http://wiki.snomone.com/index.php?title=Inbound_Calls. In addition to that, make sure that the "Explicitly list addresses for inbound traffic" settings is either empty or set to the IP address of the gateway. Quote Link to comment Share on other sites More sharing options...
Phil Smith Posted February 12, 2013 Author Report Share Posted February 12, 2013 There is information about how to handle inbound calls on http://wiki.snomone.com/index.php?title=Inbound_Calls. In addition to that, make sure that the "Explicitly list addresses for inbound traffic" settings is either empty or set to the IP address of the gateway. Thank you, there was another value in the Explicitly list addresses for inbound traffic box Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.