viptelekom Posted February 25, 2013 Report Share Posted February 25, 2013 Hello, I am looking for a solution to make the Alphatech Bluegeta SIP 1 gateway working for outgoing calls. If i register the adapter as extension i can recieve the calls without any problem. Is there a way to create a dial plan for outgoing calls to send out at one extension? Like if i call 88 the call has to go out on extesin 200. Thanks, Gergo Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted February 25, 2013 Report Share Posted February 25, 2013 Generally you should use trunks to connect to gateways. The gateway should not register to snom ONE. There is one exception/workaround if the gateway is behind NAT. Then you can register it to and extension and in the dial plan select "send call to extension" and put the extension number in the destination field. Quote Link to comment Share on other sites More sharing options...
viptelekom Posted February 26, 2013 Author Report Share Posted February 26, 2013 Generally you should use trunks to connect to gateways. The gateway should not register to snom ONE. There is one exception/workaround if the gateway is behind NAT. Then you can register it to and extension and in the dial plan select "send call to extension" and put the extension number in the destination field. The GSM Gateway is behind nat on dynamic IP, the snom enterprise pbx is on fix public IP. The problem is that without registration i cannot recieve the call and i cannot see where to route the outgoing call. At the dial plan can you give me an example regarding how to pass the destination number to the Gateway? Let's say 3000 is the GSM adapter, and i want to dial out from extension 100 to external destination number 0036702541171 . Thanks, Gergo Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted February 28, 2013 Report Share Posted February 28, 2013 The number to be called needs to be in the To-header. This is because the device registers it's contact, and according to the RFC the PBX must present that contact in the request-URI when calling the device up. Please check in your device if it is able to get the destination information out of the To-header. Quote Link to comment Share on other sites More sharing options...
viptelekom Posted October 4, 2013 Author Report Share Posted October 4, 2013 Do you know a working solution to use GSM Adapter? Which is the type of adapter you prefer? For Sending/Recieving calls too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.