shigeru Posted June 14, 2013 Report Share Posted June 14, 2013 Hello! I am getting the following log entry when I try to reset the phone by booting while pressing the # key. [8] 2013/06/14 14:20:54: HTTP: Received request for file snom870.htm from 192.168.2.155 [8] 2013/06/14 14:20:54: HTTP: file snom870.htm based on template snom_870.xml is sent to 192.168.2.155 [8] 2013/06/14 14:20:54: HTTP: Received request for file snom870-[MAC Address].htm from 192.168.2.155 [7] 2013/06/14 14:20:54: HTTP: Error finding snom870-[MAC Address].htm, Send back 404 Not Found to 192.168.2.155 [8] 2013/06/14 14:20:54: HTTP: Received request for file snom_3xx_fw.xml from 192.168.2.155 [8] 2013/06/14 14:20:54: HTTP: file snom_3xx_fw.xml based on template snom_3xx_fw.xml is sent to 192.168.2.155 [8] 2013/06/14 14:20:54: HTTP: Received request for file snom_3xx_phone-000000000000.xml from 192.168.2.155 [7] 2013/06/14 14:20:54: HTTP: Error finding snom_3xx_phone-000000000000.xml, Send back 404 Not Found to 192.168.2.155 [8] 2013/06/14 14:20:54: HTTP: Received request for file snom_870_buttons-000000000000.xml from 192.168.2.155 [7] 2013/06/14 14:20:54: HTTP: Error finding snom_870_buttons-000000000000.xml, Send back 404 Not Found to 192.168.2.155 [8] 2013/06/14 14:20:55: HTTP: Received request for file snom_web_lang.xml from 192.168.2.155 [8] 2013/06/14 14:20:55: HTTP: file snom_web_lang.xml based on template snom_web_lang.xml is sent to 192.168.2.155 [8] 2013/06/14 14:20:55: HTTP: Received request for file snom_gui_lang.xml from 192.168.2.155 [8] 2013/06/14 14:20:55: HTTP: file snom_gui_lang.xml based on template snom_gui_lang.xml is sent to 192.168.2.155 [8] 2013/06/14 14:20:58: HTTP: Received request for file snom_3xx_fs.xml from 192.168.2.155 [7] 2013/06/14 14:20:58: HTTP: No Auth info in the request: Challenge 192.168.2.155 I have not seen this ones with MAC address suffixed before. It was working fine until I have got 5.0.10. What do I need to do to address this issue? Thank you. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted June 14, 2013 Report Share Posted June 14, 2013 I guess you have entered the MAC address into one of the extensions MAC? Also, did you open then extension for provisioning (from the account overview, drop-down on the bottom right)? Do you still have any files on the html folder or web page modifications (check the webpages folder)? Quote Link to comment Share on other sites More sharing options...
shigeru Posted June 14, 2013 Author Report Share Posted June 14, 2013 I guess you have entered the MAC address into one of the extensions MAC? Also, did you open then extension for provisioning (from the account overview, drop-down on the bottom right)? Do you still have any files on the html folder or web page modifications (check the webpages folder)? Yes, I have assigned a MAC address to each of the extension account. "did you open then extension for provisioning (from the account overview, drop-down on the bottom right)? " I am not familiar with this, could you explain further? For the html folder, do you mean if I have a "html" folder in /usr/local/snomONE ? I do not have the folder named "html" there. Hope this helps you help me. Thanks. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted June 14, 2013 Report Share Posted June 14, 2013 "did you open then extension for provisioning (from the account overview, drop-down on the bottom right)? " I am not familiar with this, could you explain further? In the accounts or extensions view, you can select the accounts with the check boxes on the left and then "open accounts for MAC-based provisioning" in the select box on the bottom right. Then they can be provisioned without password for the next 10 minutes. Quote Link to comment Share on other sites More sharing options...
shigeru Posted June 15, 2013 Author Report Share Posted June 15, 2013 [/size] In the accounts or extensions view, you can select the accounts with the check boxes on the left and then "open accounts for MAC-based provisioning" in the select box on the bottom right. Then they can be provisioned without password for the next 10 minutes. So is this something I should be doing? I do not remember this option being there before. However doing the mentioned process does not make any difference, though. I am suspecting something has been changed for PnP Provisioning between 5.0.9 to 5.0.10 and 5.0.10a. Or is it the snom870 firmware 8.7.3.15 to8.7.3.19? Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.