lintes Posted June 25, 2013 Report Share Posted June 25, 2013 HI there, I'm running on a 10.7.5 with a fresh install and basically nothing installed. First of all I had some problems in installing the suggested version: http://snomone.com/downloads/snomONE/macos/snomone-5.0.8-installer.mpkg.zip the console said: 25/06/13 17:14:21,870 Installer: -[__NSCFDictionary setObject:forKey:]: attempt to insert nil value (key: packages) It seems to go well but no any interface is starting. So I tried to change the version and luckily I've found http://snomone.com/downloads/snomONE/macos/snomone-5.0.2-installer.mpkg.zip that is working. So far so good. I was able to run it. Then I've tried to update it with the suggested link: http://snomone.com/downloads/snomONE/version-5.0.10a.xml but still some problems. I've solved it taking away the "a": http://snomone.com/downloads/snomONE/version-5.0.10.xml and the update was successfully... Then the disaster: I've tried to upload the italian language prompt: http://snomone.com/downloads/snomONE/audio/audio_it.xml The web page said that the update was successful... but when I restarted (the link in the web is not working so I had to do it with the console) nothing is working any longer! I've checked with the console and here is the starting of the log: sh-3.2# ./pbxctrl --dir . --no-daemon Starting up [1] 20130625172305: Starting up version 5.0.10 [1] 20130625172305: Adding DNS server 85.37.17.57 to the dns server list [1] 20130625172305: Adding DNS server 85.38.28.80 to the dns server list [1] 20130625172306: Working Directory is /usr/Applications/snomone [5] 20130625172306: Starting threads [0] 20130625172306: TCP(IPv4):Could not bind socket to port 80 on IP 0.0.0.0 [0] 20130625172306: FATAL: Could not open TCP port 80 for HTTP/HTTPS [0] 20130625172306: (IPv6)Could not bind socket to port 80 on IP [::] [0] 20130625172306: FATAL: Could not open TCP port 80 for HTTP/HTTPS [0] 20130625172306: TCP(IPv4):Could not bind socket to port 443 on IP 0.0.0.0 [0] 20130625172306: FATAL: Could not open TCP port 443 for HTTP/HTTPS [0] 20130625172306: (IPv6)Could not bind socket to port 443 on IP [::] [0] 20130625172306: FATAL: Could not open TCP port 443 for HTTP/HTTPS [0] 20130625172306: TCP(IPv4):Could not bind socket to port 389 on IP 0.0.0.0 [0] 20130625172306: FATAL: Could not open TCP port 389 for HTTP/HTTPS [0] 20130625172306: (IPv6)Could not bind socket to port 389 on IP [::] [0] 20130625172306: FATAL: Could not open TCP port 389 for HTTP/HTTPS [0] 20130625172306: UDP(IPv4): bind() to port 0.0.0.0:161 failed [0] 20130625172306: Could not open UDP port 161 for SNMP [0] 20130625172306: UDP(IPv6): bind() to port [::]:161 failed (errno=48) [0] 20130625172306: Could not open UDP port 161 for SNMP [0] 20130625172306: UDP(IPv4): bind() to port 0.0.0.0:69 failed [0] 20130625172306: Could not open UDP port 69 for TFTP [0] 20130625172306: UDP(IPv6): bind() to port [::]:69 failed (errno=48) [0] 20130625172306: Could not open UDP port 69 for TFTP [0] 20130625172306: UDP(IPv4): bind() to port 0.0.0.0:5060 failed [0] 20130625172306: FATAL: Could not open UDP port 0.0.0.0:5060 for SIP [0] 20130625172306: UDP(IPv6): bind() to port [::]:5060 failed (errno=48) [0] 20130625172306: FATAL: Could not open UDP port [::]:5060 for SIP [0] 20130625172306: TCP(IPv4):Could not bind socket to port 5060 on IP 0.0.0.0 [0] 20130625172306: FATAL: Could not open TCP port 5060 for SIP [0] 20130625172306: (IPv6)Could not bind socket to port 5060 on IP [::] [0] 20130625172306: FATAL: Could not open TCP port 5060 for SIP [0] 20130625172306: TCP(IPv4):Could not bind socket to port 5061 on IP 0.0.0.0 [0] 20130625172306: FATAL: Could not open TCP port 5061 for SIP [0] 20130625172306: (IPv6)Could not bind socket to port 5061 on IP [::] [0] 20130625172306: FATAL: Could not open TCP port 5061 for SIP [5] 20130625172306: Set scheduling priority to 15 It seems like all the port are closed... but are not! I've little snitch running and checking all the connections... If I try to delete the directory in /usr/Application/snomone and try to reinstall nothing change... what's going on? Let me know please Marco Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted June 25, 2013 Report Share Posted June 25, 2013 We are about to release 5.1.0; but in the meantime you can take http://snomone.com/downloads/snomONE/version-5.0.10i.xml. The socket binding was a problem if the port was used before, either by the PBX itself or another service. We have smartened up the logic to grab the necessary ports. The process must run with root permissions, if you want to try to run it manually, use sudo. Quote Link to comment Share on other sites More sharing options...
lintes Posted June 25, 2013 Author Report Share Posted June 25, 2013 We are about to release 5.1.0; but in the meantime you can take http://snomone.com/downloads/snomONE/version-5.0.10i.xml. The socket binding was a problem if the port was used before, either by the PBX itself or another service. We have smartened up the logic to grab the necessary ports. The process must run with root permissions, if you want to try to run it manually, use sudo. thanks for the reply, but how can I take that xml if I can not run the program? Quote Link to comment Share on other sites More sharing options...
lintes Posted June 25, 2013 Author Report Share Posted June 25, 2013 We are about to release 5.1.0; but in the meantime you can take http://snomone.com/downloads/snomONE/version-5.0.10i.xml. The socket binding was a problem if the port was used before, either by the PBX itself or another service. We have smartened up the logic to grab the necessary ports. The process must run with root permissions, if you want to try to run it manually, use sudo. After a bit of trying I did this command: sh-3.2# ./pbxctrl --config version-5.0.10i.xml nothing happen apart from this log file: [0] 20130625183736: Upgrading from 1.x to 2.0 [1] 20130625183736: Starting up version 5.0.2 [1] 20130625183736: Adding DNS server 85.37.17.57 to the dns server list [1] 20130625183736: Adding DNS server 85.38.28.80 to the dns server list [1] 20130625183737: Working Directory is /usr/Applications/snomone [5] 20130625183737: Starting threads [0] 20130625183737: TCP(IPv4):Could not bind socket to port 80 on IP 0.0.0.0 [0] 20130625183737: FATAL: Could not open TCP port 80 for HTTP/HTTPS [0] 20130625183737: (IPv6)Could not bind socket to port 80 on IP [::] [0] 20130625183737: FATAL: Could not open TCP port 80 for HTTP/HTTPS [0] 20130625183737: TCP(IPv4):Could not bind socket to port 443 on IP 0.0.0.0 [0] 20130625183737: FATAL: Could not open TCP port 443 for HTTP/HTTPS [0] 20130625183737: (IPv6)Could not bind socket to port 443 on IP [::] [0] 20130625183737: FATAL: Could not open TCP port 443 for HTTP/HTTPS [0] 20130625183737: TCP(IPv4):Could not bind socket to port 389 on IP 0.0.0.0 [0] 20130625183737: FATAL: Could not open TCP port 389 for HTTP/HTTPS [0] 20130625183737: (IPv6)Could not bind socket to port 389 on IP [::] [0] 20130625183737: FATAL: Could not open TCP port 389 for HTTP/HTTPS [0] 20130625183737: UDP(IPv4): bind() to port 0.0.0.0:161 failed [0] 20130625183737: Could not open UDP port 161 for SNMP [0] 20130625183737: UDP(IPv6): bind() to port [::]:161 failed (errno=48) [0] 20130625183737: Could not open UDP port 161 for SNMP [0] 20130625183737: UDP(IPv4): bind() to port 0.0.0.0:69 failed [0] 20130625183737: Could not open UDP port 69 for TFTP [0] 20130625183737: UDP(IPv6): bind() to port [::]:69 failed (errno=48) [0] 20130625183737: Could not open UDP port 69 for TFTP [0] 20130625183737: UDP(IPv4): bind() to port 0.0.0.0:5060 failed [0] 20130625183737: FATAL: Could not open UDP port 0.0.0.0:5060 for SIP [0] 20130625183737: UDP(IPv6): bind() to port [::]:5060 failed (errno=48) [0] 20130625183737: FATAL: Could not open UDP port [::]:5060 for SIP [0] 20130625183737: TCP(IPv4):Could not bind socket to port 5060 on IP 0.0.0.0 [0] 20130625183737: FATAL: Could not open TCP port 5060 for SIP [0] 20130625183737: (IPv6)Could not bind socket to port 5060 on IP [::] [0] 20130625183737: FATAL: Could not open TCP port 5060 for SIP [0] 20130625183737: TCP(IPv4):Could not bind socket to port 5061 on IP 0.0.0.0 [0] 20130625183737: FATAL: Could not open TCP port 5061 for SIP [0] 20130625183737: (IPv6)Could not bind socket to port 5061 on IP [::] [0] 20130625183737: FATAL: Could not open TCP port 5061 for SIP [5] 20130625183737: Set scheduling priority to 15 it seems that same problem Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted June 25, 2013 Report Share Posted June 25, 2013 Did you try to run it as root? Without it, you might not have the permissions to open sockets. Also, check what other applications are using the ports using netstat -a. Maybe there is even another PBX already running, ps auxww|grep pbxctrl will show you that. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted June 25, 2013 Report Share Posted June 25, 2013 You can download the latest exec also with wget http://snomone.com/d...rwin10-5.0.10i. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.