neha Posted April 11, 2014 Report Share Posted April 11, 2014 When placing two calls into an Aastra handset (tested with 6755 and 6757), whilst call waiting is active, the second call is presented first on screen, despite this not being the first call into the handset. Fault can be replicated by having a single handset, placing 2 off-net calls in one-by-one and you will see that L2 becomes the dominant call on screen. Ideally, L1 should show. it can only be switched back and forth by using the left and right keys on the handset, or pressing the L1/L2 button on the handset. Is it the defined functionality or can we change this? Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted April 11, 2014 Report Share Posted April 11, 2014 That is something on the phone that we cannot influence. You would need a different firmware for the phone unless there is a setting on the phone that can change this behavior. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.