mirza89 Posted December 21, 2014 Report Share Posted December 21, 2014 Good Evening,I try to install a vm snomone and ct (Proxmox VE 3.3 64-bit) but I have a delay of 2 seconds during a call. Promox the server and the trunk are at the same operator.Do you have a return?Best Regards Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted December 22, 2014 Report Share Posted December 22, 2014 Two seconds are huge. This sounds like the media takes a ridiculous path over some satellite link and back. Try to turn on PCAP on the PBX extension and/or trunk, this will help you figuring out where the PBX sends the RTP packets. Quote Link to comment Share on other sites More sharing options...
mirza89 Posted December 23, 2014 Author Report Share Posted December 23, 2014 Thank you for your reply,Is the problem may be with the CPU timer? I saw on some forum that has to be a 1000Hz instead of 100hz.best regards Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted December 24, 2014 Report Share Posted December 24, 2014 100 Hz would be a problem, but 100 MHz should be okay at least for a few calls. Also if the CPU is really too slow the CPU would just "drown", but not delay the media. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.