andrewgroup Posted April 17, 2008 Report Posted April 17, 2008 Using a CS410 V3.0.9XXX (latest firmware) PRTG gets for six OID items with a 1 minute fetch interval appears to highly degrade call quality. Immediately upon stopping the PRTG sensor the call quality improved. After several off-on testing it appears PRTG performing SNMP gets on the OID with 1 minute interval clobbers call quality. The internet connection is a Full T1, with a Netgear WRTG54xx Router with port forwards for SNMP. 8080 admin, No sip trunks and only using 4 POTS lines. Any advice? Quote
Vodia PBX Posted April 17, 2008 Report Posted April 17, 2008 Whow. SNMP should have almost no impact on CPU performance, therefore I believe that the packet I/O would cause this. Ethereal would show it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.