Kristan Posted June 12, 2008 Report Share Posted June 12, 2008 Just got a pair of these today and they're "interesting" to setup. Got it working with PBXnSIP but the autoprovisioning is weird. Has anyone got these to work automatically? Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted June 13, 2008 Report Share Posted June 13, 2008 Just got a pair of these today and they're "interesting" to setup. Got it working with PBXnSIP but the autoprovisioning is weird. Has anyone got these to work automatically? Ehh - somehow the provisioning file got lost (we don't even find it any more...). Would be great if you can give us access to the file that you have ... Quote Link to comment Share on other sites More sharing options...
Kristan Posted June 13, 2008 Author Report Share Posted June 13, 2008 Ehh - somehow the provisioning file got lost (we don't even find it any more...). Would be great if you can give us access to the file that you have ... You can download them from here : http://downloads.polycom.com/voice/netlink...02_v130_005.zip Basically to set them up you do the following : 1. Configure SSID, WEP/WPA/WPA2 key and SIP username and password on the handset 2. Configure the DHCP boot server option to point to PBXnSIP (option 66 - same as normal polycoms) 3. Boot phone, it will get DHCP (assuming your wireless bit is correct), go to your TFTP server and ask for : slnk_cfg.cfg - this points it to the software bin files whatever.bin - it checks it's got the current version of whatever files are specified above sip_allusers.cfg - general settings - codec, sip server IP, DTMF mode etc. sip_extn.cfg - where extn is the SIP username specified manually on the handset in step 1. I asked Polycom if it were possible for the phone to request a file by MAC etc. like the soundpoint series do, but it seems that it can't. So I don't think there's much scope for autoprovisioning the phones really, as you have to hand make the sip_exten.cfg file for each extension. Unless you guys know another way? Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted June 13, 2008 Report Share Posted June 13, 2008 Well, we need at least one file with the MAC address in it. Otherwise it is really difficult to find out what account should be used for the device... Quote Link to comment Share on other sites More sharing options...
Kristan Posted June 13, 2008 Author Report Share Posted June 13, 2008 That was my thinking too. I think the we'll jus have to specify the extension and password for each manually and again manually create it a config file - it's going to be a pain if they want to change extension numbers though... I understand you guys are working pretty closely with Polycom now - I don't know if you maybe have access to resources we don't as mere resellers? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.