Jump to content

koolandrew

Members
 View Profile  See their activity

  • Posts

    179

  • Joined

  • Last visited

 Content Type 

Posts posted by koolandrew

  11. SIP inbound stop working after certain minites or hours

    in Trunk Setup

    Posted

    52 minutes ago, melanc said:

    Hi

    This is new Windows installation and all firewalls are disabled.

    We have experiencing ONLY inbound sip calls are stopped working and then we need to go to SIP trunk and click save button to resolve this issue.

    All the time outbound calls are working. Any advice?

     

     

    Have you checked with your provider, maybe they are metering your usage, and you have run out of funds. They are so many things that could go wrong on inbound calls, what you need to do to perform a trace. Find out where the calls are failing, by checking the logs on the vodia, and then if they dont provide the answers, find out from your provider.

  12. Best Practices for Multicast Paging using Snom PA1

    in Call Treatment

    Posted

    Ok, this still a little vague...please remember as your status says "Advanced Member", i dont have all your knowledge.

    When you say "Multicast Paging Group" what do you exactly mean.  i am just manually provisioning to get this to work. IThe choices, on a Grandstream, for example are, to add the multicast ip (224.1.1.2:4000) in the multicast paging section and give it a label of page. I go to the vpk section to add a button. I add the description of Page, and value of 224.1.1.2:4000, and select Multicast Paging. I could also select Multicast Listen Address, but i dont believe that is what you are suggesting.

    It actually worked, with no pbx cdrs as you said, the only difference that the PA1 and the other phones play the message.

    THE BIGGEST ISSUE REMAINING IS THAT THE MESSAGE IS ALSO PLAYED FROM THE PHONE THAT YOU ARE CALLING FROM, HOW TO PREVENT THAT NUISANCE, AS THE PLAYBACK IS AWFUL

  13. Best Practices for Multicast Paging using Snom PA1

    in Call Treatment

    Posted

    Thanks for the quick reply.

    All the phones support multicast paging, there is only one PA1 and they are all on the same lan.

    Are you suggesting, creating a Unicast paging with the PA1 extension only in the group, and using the PA1 to multicast to all the phones that have the multicast ip setup.

    In this case, the pbx would effectively only unicast to the Snom PA1 and it in turn would multicast to the phones that have been setup?

  14. Best Practices for Multicast Paging using Snom PA1

    in Call Treatment

    Posted

    There isnt alot of information regarding this topic, so hopefully the response will be useful for others as well.

    Three options

    No pbx involvement with paging

    1. I have gathered that you put the mulitcast ip address from the PA1 and copy it to the mulitcast settings on whatever brand of phone you choose ie (224.1.1.2:4000) so they will ring at the same time as when the shortcut key on the phone is selected with this value.

    Pbx involvement

    2. Call the paging extension (unicast) and put the SNOM PA1 extension number in as one of the extensions to be dialled. It in turn broadcasts through the multicast ip to the other phones that are selected.

    3. Call the extension number of the PA1 directly from any phone to start a page and the other phones will broadcast as above.

    Thanks

     

  17. Rewriting inbound caller IDs?

    in Trunk Setup

    Posted

    When the country code is set back to 1, and that setting of dont rewrite on a trunk is set, the + gets removed when using "dont rewrite" or "use + symbol at the beginning". I dont think there is any way to use the 1 as country code and keep +1555555555 (for example) on inbound calls.

  18. Dial plan--removing non numeric characters

    in Call Treatment

    Posted

    i mean it doesnt work...the number dialled +442070046000 becomes 011 when it is goes to the carrier.

    In any event, i have unlocked this mystery. The one topic not discussed was the order of the dial plans as the order screwed it up. I had to put in the +1* rule at the top...and voila it worked. Regarding the other one, i figured it out as it is is simply +* and again, it has to stay in that order for it to work.

     

    thanks

    image.png

  23. pattern / replacement

    in Dial Plan Setup

    Posted

    i am not sure what all this means. All i am trying to do is remove the + from a dialled number. From +1 to 1 and from +44 (for example) to 01144....from the dial plan. I dont think it can be done, and all i am asking is for a confirmation. If it can only be done from a trunk then again, i am all ears. This should be straightforward.

    Thanks

×
×
  • Create New...