reco
-
Posts
242 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by reco
-
-
hi there,
i am trying icall as a did and gateway provider.
they have different outbound servers for local and international calls.
Inbound: gw01-car.dal.us.icall.net
International outbound: gw01-car.dal.us.icall.net
Domestic outbound: sbc01-car.dal.us.icall.net
I setup 3 trunks:
- sip registration inbound only: icall-in
- international sip gateway: icall-international
- domestic sip gateway: icall-domestic
dial plan:
icall-international: 011* ⇾ 011*
icall-domestic: * ⇾
is this the right way to do it?
thanx
-
hi there,
i have a 370 loosing registation with pbxnsip. logging into the phone web interface and clicking re-register on the identity does solve the problem. only reboot will fix it.
snom version: snom370-SIP 7.3.26 14999
pbxnsip: 3.4.0.3201 darwin
the phone is PnP provisioned with the pbxand sip and has 2 identities configured.
any ideas?
reco
-
hi there,
is it possible to use google voice as a trunk?
anybody tried this?
thanx
-
Nobody had this prob?
Crazy
-
hi there,
i have a very simple setup with 3 domains on my server.
every domain has it's own sip trunk to the provider - in my case callcentric.com.
Some extension from Domain A calls the DID of Domain B -> error from sip provider.
Why does pbxnsip not recoginze that this DID exists in the system and simply routs it as an incoming call to the trunk of Domain B?
my config:
version 3.3.1.3177 (Darwin)
i have all trunks set to global.
i disabled admin > settings: loopback detection
i set an alias with the DID `+2125556666` and `+12125556666` on a AA but still not works.
please help!!!
-
i like the wiki better. much better organized.
me to i dont like the esupport system.
other companies are using it. same thing there.
searching either finds to much or nothing.
for example i am trying to find out what `Accept Redirect` on the trunk settings mean.
i search for `Accept Redirect trunk` the first result is `domain settings`
bad
-
i have setup 6 co lines.
if a user pushes the line buttons followed by `X` all lines are indicated in use by the led on the phone.
seems like the pbx does not release the line after pressing `X`.
After this button press sequence all lines LED's are shown active even though there is no phone call going on.
Line1
X (abort)
Line2
X (abort)
Line3
X (abort)
Line4
X (abort)
Line5
X (abort)
Line 6
X (abort)
this is a new behaviour in 3.3.x
before when you used a line but aborted it was released right away.
any idea?
-
We figured it out. If anyone is interested send me a private message and then we can get numbers and I can walk you through it. It's a bit step oriented.
come one write some good docu for yourself and post it on the wiki...
we all share here no?
reco
-
can you set the search minimum digits to 3 (instead of 4)?
it makes it hard to search for 320, or PNP, or SPA......
+1
-
hi pbxnsip
the custom wav works.
but on the snom wiki its mentioned that its possible to set the internal Ringtones too
http://kb.snom.com/kb/index.php?View=entry...&EntryID=28
id didnt work though any idea? think this is more a snom issue:
i tried:
<?xml version="1.0" encoding="UTF-8" ?>
<ringtones>
<tone name="alert-internal" type="internal">
<vendor ua="snom.*" type="alert-info"><Ringer7></vendor>
</tone>
<tone name="alert-external" type="external">
<vendor ua="snom.*" type="alert-info"><Ringer7></vendor>
</tone>
</ringtones>
and
<?xml version="1.0" encoding="UTF-8" ?>
<ringtones>
<tone name="alert-internal" type="internal">
<vendor ua="snom.*" type="alert-info">Ringer7</vendor>
</tone>
<tone name="alert-external" type="external">
<vendor ua="snom.*" type="alert-info">Ringer7</vendor>
</tone>
</ringtones>
ringtones.xml in http dir,
restarted pbx after every change
-
hi ray any news?
-
-
hi nexsip
i have snom 320 phones
so in my tftp dir i have a file called `snom_320_custom.xml`
<?xml version="1.0" encoding="utf-8"?>
<phone-settings>
<holding_reminder perm="RW">off</holding_reminder>
</phone-settings>
this works for me just fine.
reco
-
hi matt,
this look promising thanx!!
-
hi there,
i know skype is closed and proprietary but did anyone manage to somehow connect the pbx to a skype account? i am not really interested in outgoing calling more skype user call me.
thanx reco
-
he pbxnsip,
congrats! it just works.....
thanx!
-
i see....
is this something i could install with mac port?
thanx
-
hi pbxnsip
On Tab: Admin / PnP
I have Trust MAC addresses for PnP: ON
I still do not get my phone provisioned after a reset (which deletes login data).
I am sure i have the MAC address correct on the registration tab of the Account.
thanx christof
-
see the attachment what options i have in: Admin / Ports / TFTP
-
this works lovely
put this file into tftp dir
thanx pbxnsip
-
hi there,
after installing version 3160 provisioning over http authentication works.
on your phone webadmin got to
Advanced / QoS/Security
HTTP Client:
User: ext@domain
pwd: your pwd
after a reset of the phone those settings get deleted.
the wiki mentions there is an option `username/password required` which should provision phones based on their mac address without http authentication.
i cannot find that option in 3160 and there is not reference on the wiki.
thanx christof
-
Hi there.
The phones are on the same subnet than the PBX.
Where can I get a 3160 mac binary?
Thanx
-
hi there,
i just upgraded to the new version to get INTERCOM working. Unfortunately i am stepping into more other problems.
After the upgrade to 3.3.0.3156 the PnP page was totally messed up. I went ahead and deleted the whole directory pnp_parmes and restarted the server.
This solved my prob with the PnP page.
After i RESET one of my SNOM 320 (firmware 7.3.14) phones its seems to `Checking for Configuration...` and then I have the following message on the display:
Prov.request attemp: 20 (counting down till 0)
The result is a un-provisioned phone. These phones were provisioning with version pbxctrl-darwin9.0-3.2.0.3143
I also tried to reload the firmware, which worked but still could not get the phone provisioned.
I tried this with `Trust MAC addresses for PnP` set to ON and OFF. Still no luck.
attached my PnP Page.
logfile with http, tftp, SNMP and general events on (Log level 9)
voice:~ root# tail -f /Library/Logs/Pbxnsip-error.log [9] 20090311174302: UDP: Opening socket on [::]:49255 [1] 20090311174302: UDP: TOS could not be set [1] 20090311174440: Last message repeated 2 times [5] 20090311174440: Web Server: File snom_3xx.xml not found [2] 20090311174505: load: Index domain not set [2] 20090311174510: Last message repeated 2 times [9] 20090311174510: Remote site closed the connection [9] 20090311174520: Last message repeated 2 times [5] 20090311174520: Web Server: File snom_3xx.xml not found [9] 20090311174520: Remote site closed the connection [9] 20090311174544: Last message repeated 5 times [5] 20090311174544: Web Server: File snom_3xx.xml not found [9] 20090311174616: Remote site closed the connection [5] 20090311174619: Web Server: File tftp/style.css not found [5] 20090311174619: Web Server: File tftp/img/gradient1.gif not found [5] 20090311174619: Web Server: File tftp/img/gradient5.gif not found [5] 20090311174619: Web Server: File tftp/img/login.gif not found [5] 20090311174619: Web Server: File tftp/img/gradient4.gif not found [5] 20090311174620: Web Server: File tftp/img/login_head.gif not found [8] 20090311174620: Remove http session fvmy0fstmmey0s3cjk1a [9] 20090311174649: Remote site closed the connection [8] 20090311174958: HTTP client: Connect to 75.150.83.3:443 [9] 20090311175010: UDP: Opening socket on 0.0.0.0:54734 [9] 20090311175010: UDP: Opening socket on 0.0.0.0:54735 [9] 20090311175010: UDP: Opening socket on [::]:54734 [9] 20090311175010: UDP: Opening socket on [::]:54735 [1] 20090311175010: UDP: TOS could not be set [1] 20090311175010: Last message repeated 2 times [9] 20090311175010: UDP: Opening socket on 0.0.0.0:63376 [9] 20090311175010: UDP: Opening socket on 0.0.0.0:63377 [9] 20090311175010: UDP: Opening socket on [::]:63376 [9] 20090311175010: UDP: Opening socket on [::]:63377 [1] 20090311175010: UDP: TOS could not be set [1] 20090311180452: Last message repeated 2 times [9] 20090311180452: UDP: Opening socket on 0.0.0.0:57836 [9] 20090311180452: UDP: Opening socket on 0.0.0.0:57837 [9] 20090311180452: UDP: Opening socket on [::]:57836 [9] 20090311180452: UDP: Opening socket on [::]:57837 [1] 20090311180452: UDP: TOS could not be set [1] 20090311180452: Last message repeated 2 times [9] 20090311180452: UDP: Opening socket on 0.0.0.0:61332 [9] 20090311180452: UDP: Opening socket on 0.0.0.0:61333 [9] 20090311180452: UDP: Opening socket on [::]:61332 [9] 20090311180452: UDP: Opening socket on [::]:61333 [1] 20090311180452: UDP: TOS could not be set [1] 20090311180529: Last message repeated 2 times [9] 20090311180529: UDP: Opening socket on 0.0.0.0:61200 [9] 20090311180529: UDP: Opening socket on 0.0.0.0:61201 [9] 20090311180529: UDP: Opening socket on [::]:61200 [9] 20090311180529: UDP: Opening socket on [::]:61201 [1] 20090311180529: UDP: TOS could not be set [1] 20090311180529: Last message repeated 2 times [9] 20090311180529: UDP: Opening socket on 0.0.0.0:59168 [9] 20090311180529: UDP: Opening socket on 0.0.0.0:59169 [9] 20090311180529: UDP: Opening socket on [::]:59168 [9] 20090311180529: UDP: Opening socket on [::]:59169 [1] 20090311180529: UDP: TOS could not be set [1] 20090311180913: Last message repeated 2 times [9] 20090311180913: Remote site closed the connection
called in support, unfortunately good old christian seems to be the only who knows ;(
to less information here:
http://wiki.pbxnsip.com/index.php/Release_...3#Plug_and_play
thanx reco
-
ok this fix my prob.
but this was only working on 3.3.0.3156
now my phones cannot lead the config of the PnP grrr... but for this i start another topic now.
thanx
iCall Trunk setup
in Trunk Setup
Posted
somebody uses icall here?
thanx