olecoot Posted June 18, 2008 Report Share Posted June 18, 2008 Has anyone experienced this error message: kernel: usb 1-4: usbfs: process 32630 (pbxctrl) did not claim interface 0 before use PBXnIP 2.1.10.2474 kernel ver 2.6.18-53.1.14.el5 Red Hat The usb port is working in the fact that the license associated with the dongle is recognized by PBXnSIP. cat /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.18-53.1.14.el5 ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:0f.2 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0e50 ProdID=0002 Rev= 1.01 S: Manufacturer=TDi GmbH - Germany S: Product=USB-Chip C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 8mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted June 18, 2008 Report Share Posted June 18, 2008 Could be... As long as it works we are happy already. The PBX uses a library to access the dongle, and that library is probably a little bit too pragmatic. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.