impiantitel Posted May 24, 2019 Report Share Posted May 24, 2019 Bye, despite having set up the NTP server (see 3 attached screens) the SNOM-715 phone displays the attached information at each boot. Solution? Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted May 24, 2019 Report Share Posted May 24, 2019 NTP does not tell the phone what time zone it is in. This is done using the phone provisioning. For setting the NTP server, there are two things you can do here. Pick a NTP port (e.g. 8232) so that the PBX will provide the NTP service (not sure but this might require a restart of the PBX service) and then re-provision the phone. Obviously then you must make sure that the PBX has the correct time. Or make sure that the phone can reach the NTP server on public Internet. You can also choose another server, e.g. pool.ntp.org. Maybe your firewall is blocking that kind of traffic. You can also check on the phone if it was able to resolve the DNS address (snom phones show you the content of the DNS server). Quote Link to comment Share on other sites More sharing options...
impiantitel Posted May 24, 2019 Author Report Share Posted May 24, 2019 hi, in reality I think I have solved by setting "System management DNS address", since I put in this field I DNS the error of the NTP has been solved. Correct doing so? Damiano Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted May 24, 2019 Report Share Posted May 24, 2019 System management DNS address has nothing to do with NTP. Maybe the problem went away because of some other change. Quote Link to comment Share on other sites More sharing options...
impiantitel Posted May 24, 2019 Author Report Share Posted May 24, 2019 I have not changed absolutely nothing except that, but in computer science everything is possible Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.