Vodia PBX Posted March 10, 2009 Report Share Posted March 10, 2009 I just tried, *90it asks "please enter the extension number" i dial "ext" it says, you are not allowed to place this call. If you like, please try http://pbxnsip.com/protect/pbxctrl-3.3.0.3159.exe. Please use the PnP mechanism to make sure that the phones get the right setup. Also make sure that the PnP firmware version is the 7.3.14. Quote Link to comment Share on other sites More sharing options...
reco Posted March 11, 2009 Author Report Share Posted March 11, 2009 Updated to 3156. And just works again. with7.1.x and 7.3.x firmware thanx! Reco Since it is working in our lab with the same versions, it is hard to declare it as a bug yet. We are looking into other aspect that could impact the intercom behavior now.BTW, there is a new version for both windows and mac - http://www.pbxnsip.com/protect/pbxctrl-3.3.0.3156.exe, http://www.pbxnsip.com/protect/pbx-darwin9.0-3.3.0.3156.zip If you want to give the Mac version a spin, feel free(make a back up of the old data). Intercom works ok on both the versions here. Quote Link to comment Share on other sites More sharing options...
reco Posted March 11, 2009 Author Report Share Posted March 11, 2009 ATTENTION!!! after upgrade outgoing calls do not work anymore... seems like something with the dialplans did get messup.... i am getting a message form callcentric that the number cannot be dialed as entered. back to 3.2.0.3143 and trunks are working again. 9] 20090311120259: SIP Rx tls:PBXIP:2092: INVITE sip:2223334444@domain.com;user=phone SIP/2.0 Via: SIP/2.0/TLS PBXIP:2092;branch=z9hG4bK-hzyu0mnjw7ur;rport From: "Christof Haemmerle" <sip:33@domain.com>;tag=uz3ub5iepq To: <sip:2223334444@domain.com;user=phone> Call-ID: 3c267f040947-s0n92pf3dhh4 CSeq: 1 INVITE Max-Forwards: 70 Contact: <sip:33@PBXIP:2092;transport=tls;line=3lalk32m>;reg-id=1 P-Key-Flags: keys="3" User-Agent: snom320/7.3.14 Accept: application/sdp Allow: INVITE, ACK, CANCEL, BYE, REFER, OPTIONS, NOTIFY, SUBSCRIBE, PRACK, MESSAGE, INFO Allow-Events: talk, hold, refer, call-info Supported: timer, 100rel, replaces, from-change Session-Expires: 3600;refresher=uas Min-SE: 90 Proxy-Require: buttons Content-Type: application/sdp Content-Length: 448 v=0 o=root 1261499776 1261499776 IN IP4 PBXIP s=call c=IN IP4 PBXIP t=0 0 m=audio 49258 RTP/AVP 9 0 8 2 3 18 4 101 a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:XqGHT9IY82/nH54UAbnMsBdqMEe7u+hlebOorv2d a=rtpmap:9 g722/8000 a=rtpmap:0 pcmu/8000 a=rtpmap:8 pcma/8000 a=rtpmap:2 g726-32/8000 a=rtpmap:3 gsm/8000 a=rtpmap:18 g729/8000 a=rtpmap:4 g723/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=ptime:20 a=sendrecv [8] 20090311120259: Packet authenticated by transport layer [9] 20090311120259: UDP: Opening socket on 0.0.0.0:51702 [9] 20090311120259: UDP: Opening socket on 0.0.0.0:51703 [9] 20090311120259: UDP: Opening socket on [::]:51702 [9] 20090311120259: UDP: Opening socket on [::]:51703 [1] 20090311120259: UDP: TOS could not be set [1] 20090311120259: Last message repeated 2 times [8] 20090311120259: Could not find a trunk (3 trunks) [9] 20090311120259: Using outbound proxy sip:PBXIP:2092;transport=tls because of flow-label [9] 20090311120259: Last message repeated 2 times [9] 20090311120259: SIP Tx tls:PBXIP:2092: SIP/2.0 100 Trying Via: SIP/2.0/TLS PBXIP:2092;branch=z9hG4bK-hzyu0mnjw7ur;rport=2092 From: "Christof Haemmerle" <sip:33@domain.com>;tag=uz3ub5iepq To: <sip:2223334444@domain.com;user=phone>;tag=1aa0ae9577 Call-ID: 3c267f040947-s0n92pf3dhh4 CSeq: 1 INVITE Content-Length: 0 [7] 20090311120259: Set packet length to 20 [6] 20090311120259: Sending RTP for 3c267f040947-s0n92pf3dhh4#1aa0ae9577 to PBXIP:49258 [9] 20090311120259: Dialplan: Evaluating !^(411)@.*!sip:\1@\r;user=phone!i against 2223334444@domain.com [9] 20090311120259: Dialplan: Evaluating !^([0-9]{10})@.*!sip:1\1@\r;user=phone!i against 2223334444@domain.com [5] 20090311120259: Dialplan voip: Match 2223334444@domain.com to <sip:12223334444@callcentric.com;user=phone> on trunk callcentric-domain [9] 20090311120259: UDP: Opening socket on 0.0.0.0:54758 [9] 20090311120259: UDP: Opening socket on 0.0.0.0:54759 [8] 20090311120259: Play audio_moh/noise.wav [9] 20090311120259: UDP: Opening socket on [::]:54758 [9] 20090311120259: UDP: Opening socket on [::]:54759 [1] 2009 Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted March 11, 2009 Report Share Posted March 11, 2009 [5] 20090311120259: Dialplan voip: Match 2223334444@domain.com to <sip:12223334444@callcentric.com;user=phone> on trunk callcentric-domain Sounds like a problem with the 10/11-digit representation. If you have country code == "1" then use only 10-digit numbers in the dial plan. Quote Link to comment Share on other sites More sharing options...
reco Posted March 11, 2009 Author Report Share Posted March 11, 2009 callcentric only accepts 11digit numbers so my dial plan looks like this: prio trunk pattern replacement 98 callcentric 411 99 Try Loopback xx 200 callcentric 011* 011* 202 callcentric xxxxxxxxxx 1* 203 callcentric xxxxxxxxxxx * version 3.2.0.3143 works as expected dial: 222 333 4444 the trunk gets 1 222 333 4444 after upgrading to 3.3.0.3156 dial: 222 333 4444 the trunk gets 222 333 4444 i know this is already another topic... but... sorry thanx Quote Link to comment Share on other sites More sharing options...
pbx support Posted March 11, 2009 Report Share Posted March 11, 2009 callcentric only accepts 11digit numbers so my dial plan looks like this: prio trunk pattern replacement 98 callcentric 411 99 Try Loopback xx 200 callcentric 011* 011* 202 callcentric xxxxxxxxxx 1* 203 callcentric xxxxxxxxxxx * version 3.2.0.3143 works as expected dial: 222 333 4444 the trunk gets 1 222 333 4444 after upgrading to 3.3.0.3156 dial: 222 333 4444 the trunk gets 222 333 4444 i know this is already another topic... but... sorry thanx Can you try the following? Under domain, set the "Country Code" to '1' and under the trunk, set the "Rewrite global number" to "For NANPA 11 digits". Then, under "dial plans", you can just have one entry (instead of 202 and 203) with pattern=*, replacement=*. Quote Link to comment Share on other sites More sharing options...
reco Posted March 11, 2009 Author Report Share Posted March 11, 2009 ok this fix my prob. but this was only working on 3.3.0.3156 now my phones cannot lead the config of the PnP grrr... but for this i start another topic now. thanx Quote Link to comment Share on other sites More sharing options...
Great Office - Hummig KG Posted May 23, 2009 Report Share Posted May 23, 2009 I'm having a hard time getting the intercom feature to work on snom handsets. for example, extension 600, i dial *90600 it should auto pick up that phone. instead, it just rings the extension.Any one have any input? I've had the same problem. But solved it by setting the Snom-Phone to: Setup/Advanced/Behaviour/Enable Intercom = yes Or by butting the following command into my snom_3xx_custom.xml <settings> <phone-settings e="2"> <intercom_enabled perm="">on</intercom_enabled> </phone-settings> </settings> Hope this will help you, too. Regards, Lucas Humig Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.