ezhil Posted August 17, 2009 Report Share Posted August 17, 2009 Hi, Is there a way where we can configure the PBXnsIP servers (mulitples servers in different data center) to set it as failover using the global DNS preference option. Like... (example) aa.com is the domain name. Two servers PBXnSIP servers are installed in two different data center and regular DB sync with the IP address (61.95.159.200 and 72.54.23.94) For some reasons if the first server 61.95.159.200 goes down, the second server 72.54.23.94 becomes the available server, where the SIP account/extensions gets registered to second server IP with the preference level set. aa.com ---> 61.95.159.200 ---> Preference 10 aa.com ---> 72.54.23.94 ------> Preference 20 Is this setup is possible with PBXnSIP, as well is there any one is running with this setup. Thanks and Regards, Ezhil Quote Link to comment Share on other sites More sharing options...
pbxuser911 Posted August 17, 2009 Report Share Posted August 17, 2009 the problem i see is HTTP not working once the new one takes over also another issue would be routing incoming calls to the new server, unless you register your trunk and not just a sip gateway also, do the phone actually get provisioned with DNS SRV enabled if you provision the phones using HTTP? the setup we use is the 2nd server actually takes the IP off the first server, but both servers are in the same data center Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted August 28, 2009 Report Share Posted August 28, 2009 the problem i see is HTTP not working once the new one takes over Right. In addition if you are using DNS for TFTP and SNMP, they would also have to support DNS SRV (which they don't). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.