Adam-ESPN Posted April 27, 2010 Report Share Posted April 27, 2010 I am attempting to establish an inbound truck with an International DID provider (DIDWW). Is it a SIP Gateway. This is the information they have provided (they assume I am using Asterisk, not pbxnsip): USA 1: Outgoing Settings Trunk Name: didww_us Incoming Settings USER Context: from-didww1 USER Details: dtmf=rfc2833 dtmfmode=rfc2833 host=204.11.194.34 insecure=very type=peer context=from-trunk Which fields should I input this information within PBXnSIP's trunk set up page? I am running pbxnsip version 3.0.1.3023 (Win32) Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted April 27, 2010 Report Share Posted April 27, 2010 Sounds like you should use the gateway mode and set the domain and outbound proxy to that IP address. I guess they also gave you a password, so put it into the password field; the user name then needs to go into the field above the password. DTMF is negotiated automatically, the PBX support RFC2833 (which is now RFC4733) and the PBX indicates that is supports it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.