adampcpi Posted August 24, 2010 Report Share Posted August 24, 2010 We are running pbxnsip v4 and using Snom 360 phones. Paging is working in multicast mode just fine but some users want to block pages due to being on another phone or don't want it to be on their phone just temporarily (so I don't want to configure their phones to never page). I have tried turning DND on but the paging still goes through. Also on a side note the only way we have been able to turn the volume down for the paging is to turn the speakerphone volume all the way down but when you want to use the speakerphone you have to turn the volume back up and then back down to turn the paging down again. Any work around on this one? TIA -Adam Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted August 25, 2010 Report Share Posted August 25, 2010 Good point. From the PBX there is nothing really that can be done there, especially in multicast mode (moving the topic to the snom section). It is really a policy question if paging should be audible for the phone. I don't think paging is really being used for emergency purposes, such stuff happens on overhead paging. So I would tend to say by default multicast paging should be disabled. Quote Link to comment Share on other sites More sharing options...
sipnpbx Posted August 25, 2010 Report Share Posted August 25, 2010 We are running pbxnsip v4 and using Snom 360 phones. Paging is working in multicast mode just fine but some users want to block pages due to being on another phone or don't want it to be on their phone just temporarily (so I don't want to configure their phones to never page). I have tried turning DND on but the paging still goes through. Also on a side note the only way we have been able to turn the volume down for the paging is to turn the speakerphone volume all the way down but when you want to use the speakerphone you have to turn the volume back up and then back down to turn the paging down again. Any work around on this one? TIA -Adam You can configure an action URL for turning the paging setting off on a function button. Eg. on the phone web page function keys, select a function key and set its type to Action URL from the drop down, then in its number field enter: http://127.0.0.1/dummy.htm?settings=save&a...cast_listen=off and save it. When this key is pressed now, multicast will be turned off. You can choose another key to set it back on by the action url: http://127.0.0.1/dummy.htm?settings=save&a...icast_listen=on and save it. Quote Link to comment Share on other sites More sharing options...
pbx support Posted August 25, 2010 Report Share Posted August 25, 2010 You can configure an action URL for turning the paging setting off on a function button.Eg. on the phone web page function keys, select a function key and set its type to Action URL from the drop down, then in its number field enter: http://127.0.0.1/dummy.htm?settings=save&a...cast_listen=off and save it. When this key is pressed now, multicast will be turned off. You can choose another key to set it back on by the action url: http://127.0.0.1/dummy.htm?settings=save&a...icast_listen=on and save it. May be for the future releases - the phone can probably toggle the multicast listen when the DND key is pressed (can be a new setting). Quote Link to comment Share on other sites More sharing options...
adampcpi Posted August 25, 2010 Author Report Share Posted August 25, 2010 You can configure an action URL for turning the paging setting off on a function button.Eg. on the phone web page function keys, select a function key and set its type to Action URL from the drop down, then in its number field enter: http://127.0.0.1/dummy.htm?settings=save&a...cast_listen=off and save it. When this key is pressed now, multicast will be turned off. You can choose another key to set it back on by the action url: http://127.0.0.1/dummy.htm?settings=save&a...icast_listen=on and save it. I added the supplied Action URL's to the DND Action URL's and it works with the DND button.... Thanks! Now is there anyway to change make this setting the default for all phones and push it down to the phones via pbxnsip or do we have to log into each phone and make this change? TIA -Adam Quote Link to comment Share on other sites More sharing options...
sipnpbx Posted August 26, 2010 Report Share Posted August 26, 2010 I added the supplied Action URL's to the DND Action URL's and it works with the DND button.... Thanks! Now is there anyway to change make this setting the default for all phones and push it down to the phones via pbxnsip or do we have to log into each phone and make this change? TIA -Adam You can provision it for the DND action urls settings. action_dnd_on_url!: action_dnd_off_url!: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.