Silvio Posted July 31, 2011 Report Share Posted July 31, 2011 Hi I installed Snom ONE free edition on my Windows 7 Pro 64bit computer. I tried to connect to the Snom ONE PBX using a Snom 370 phone. Settings in Snom ONE and Snom 370 is correct, it does work if I turn off the Windows FireWall completly. Is it necessary to manually open port 5060 and 5061 in Windows FireWall? Are there also other ports needed, which I should open in Windows FireWall? Thank you for your help! Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted August 1, 2011 Report Share Posted August 1, 2011 Yes you need to tell the firewall that it must trust the pbxctrl.exe. I would not work on specific ports, because the PBX can open a lot of different ports (SIP UDP/TCP/TLS, HTTP TCP/TLS, DNS client, LDAP, SMTP client, TFTP, NTP, and a large range orf RTP ports). You can do it like this: Open "Windows Firewall" (not the advanced firewall) which is in the control panel. Then on the left upper side there is "Allow a program or feature through the firewall", click on it. Then you get a dialog "Allow programs to cimmunicate through Windows Firewall", where you can "add another program" (at the bottom). I usually select domain, home/work and public (all), you never know where the PBX needs to connect to (e.g. for sending an email out). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.