Joe Williams Posted June 11, 2012 Report Share Posted June 11, 2012 Using Snom ONE v4.5.0.1075 Delta Aurigids How do I set a button on a Snom 300 handset to toggle a service flag on the PBX? I want the button LED to reflect the state of the service flag, so I assume it's not as easy as sending the appropriate * code as a speed dial. Thanks in advance Quote Link to comment Share on other sites More sharing options...
pbx support Posted June 11, 2012 Report Share Posted June 11, 2012 Under "Admin->Settings->PnP" page, there are special settings for snom 300 keys 3-6. You can cleanup these first depending on the requirement, i.e., you can take out the least important key setting there and make it available for the service flag button. Then you can create and assign a button profile (http://wiki.snomone.com/index.php?title=Buttons, http://wiki.snomone.com/index.php?title=Button_Programming) for that extension. Quote Link to comment Share on other sites More sharing options...
Joe Williams Posted June 12, 2012 Author Report Share Posted June 12, 2012 Under "Admin->Settings->PnP" page, there are special settings for snom 300 keys 3-6. You can cleanup these first depending on the requirement, i.e., you can take out the least important key setting there and make it available for the service flag button. Then you can create and assign a button profile (http://wiki.snomone.com/index.php?title=Buttons, http://wiki.snomone.com/index.php?title=Button_Programming) for that extension. Ah, many thanks. I'd got it in my head that the Snom 300 couldn't be programmed with the button profiles. Quote Link to comment Share on other sites More sharing options...
Joachim Fuchs Posted June 13, 2012 Report Share Posted June 13, 2012 Under "Admin->Settings->PnP" page, there are special settings for snom 300 keys 3-6. You can cleanup these first depending on the requirement, i.e., you can take out the least important key setting there and make it available for the service flag button. Then you can create and assign a button profile (http://wiki.snomone.com/index.php?title=Buttons, http://wiki.snomone.com/index.php?title=Button_Programming) for that extension. I have the same problem (running 2011-4.5.0.1031 Beta Corona Austrinids), but your solution doesn't work for me. If I clean the PnP setting for key 3 and assign a button profile with key 3, the key 3 has no function at all. I can only configure button 1 and 2 by button profiles... Any ideas? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
pbx support Posted June 14, 2012 Report Share Posted June 14, 2012 There is no difference between those 2 versions with respect to buttons. Just make sure you have selected the right button number. Quote Link to comment Share on other sites More sharing options...
Joachim Fuchs Posted June 15, 2012 Report Share Posted June 15, 2012 There is no difference between those 2 versions with respect to buttons. Just make sure you have selected the right button number. I have edited "Setting for snom 300 (button 3):" in the PnP settings and button number 3 in the button profile. After deleting the value "keyevent F_REDIAL" in the PnP settings, the button has no function anymore, even if the button profile is assigned. Is there a restriction, that snom 300 buttons 3 - 6 can only be configured by PnP? Or is there a way to configure a service flag button in the PnP settings? Thanks in advance! Regards, Joachim Quote Link to comment Share on other sites More sharing options...
pbx support Posted June 15, 2012 Report Share Posted June 15, 2012 You can configure the keys listed in this page from the Admin->Settings->PnP page - http://wiki.snom.com/Category:Setting:Function_Keys Any other key, you can use the button profiles (domain->settings->buttons). Quote Link to comment Share on other sites More sharing options...
pbx support Posted June 18, 2012 Report Share Posted June 18, 2012 Seems like 300 is not that "straight-forward". But the "Web Page Control" always there for the resue You will have to customize the snom_300_fkeys.xml file (using the method described here http://wiki.snomone.com/index.php?title=Modifying_Plug_and_Play_Files) for the buttons to work on snom 300. {if_button 3 none} <fkey idx="2" context="active" perm="RW">{enum_button 3 button+3 private=line}</fkey> {fi_button 3 none} Quote Link to comment Share on other sites More sharing options...
Joachim Fuchs Posted July 2, 2012 Report Share Posted July 2, 2012 That's it! Thank you very much! Regards, J. Fuchs Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.