Jump to content

Connect SPA3102 line 1 to Snom 320


Valiant

Recommended Posts

G'Day everyone.

I'm trying to set up a Snom 320 to 2 x SPA3102 with an analogue connected to the FXS port(line 1)on each of them.Every other thread I have seen people are connecting the SPA3102 to the PSTN (FXO) line. I would have just used the ATA's as I have in the past but it is required for this set up using an IP Snom phone.

Have been able to get the Snom to call the analogue phone but not the other way when the analogue phone is taken off hook.

I know that this is a strange set up with no PABX or soft PBX set up.

Question is that can it be registered with each other and how.

I might be missing something as I'm new to this kind of field.

Any help would be greatfull.

Link to post
Share on other sites

You need to register the SPA to the PBX as extension. If you have FXS that is extension on the PBX, while FXO is typically a gateway trunk. Once you registered, you should be in good shape regarding basic features. After that you have to check what codes are set up on the SPA, so that you can e.g. call Do Not Disturb from the FXS.

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...