Pablo Posted October 17, 2012 Report Share Posted October 17, 2012 My IP Access List current reads as follows: IP Address Type [Comment] 204.11.192.0/22 Allow [CallCentric] 1xx.xxx.xxx.0/23 Allow [u-verse] 192.168.2.0/24 Allow [LAN] 127.0.0.1/32 Allow [localhost] 69.90.209.57/32 Allow [VoipVoip] 99.xxx.xxx.xxx/32 Allow [Home Office] In trying to block "everything else," I add the following entry: [iP address] 0.0.0.0 [Netmask] 0.0.0.0 [Type] Block However, when I do so, my CallCentric trunk's registration drops and I receive continuous 408 errors. What am I doing wrong? Thanks! Quote Link to comment Share on other sites More sharing options...
Vodia support Posted October 17, 2012 Report Share Posted October 17, 2012 Can you remove your entry 0.0.0.0 [Netmask] 0.0.0.0 and check if Callcentric comes back? I heard they're having some issues lately. Quote Link to comment Share on other sites More sharing options...
Pablo Posted October 21, 2012 Author Report Share Posted October 21, 2012 Can you remove your entry 0.0.0.0 [Netmask] 0.0.0.0 and check if Callcentric comes back? I heard they're having some issues lately. I did as instructed and CallCentric came back. Being conscious of the troubles CallCentric has been experiencing recently, I tried this over a few days--and, each time, within seconds of deleting the [iP Address] 0.0.0.0 [Netmask] 0.0.0.0 entry, CallCentric would come back. Then, when I went back to the IP Access Control page & added [iP Address] 0.0.0.0 [Netmask] 0.0.0.0 and then checked under the Domain/Trunks tab, CallCentric (almost immediately) returned a persistent 408 Request Timeout. Any thoughts? Quote Link to comment Share on other sites More sharing options...
Steve B Posted October 22, 2012 Report Share Posted October 22, 2012 I did as instructed and CallCentric came back. Being conscious of the troubles CallCentric has been experiencing recently, I tried this over a few days--and, each time, within seconds of deleting the [iP Address] 0.0.0.0 [Netmask] 0.0.0.0 entry, CallCentric would come back. Then, when I went back to the IP Access Control page & added [iP Address] 0.0.0.0 [Netmask] 0.0.0.0 and then checked under the Domain/Trunks tab, CallCentric (almost immediately) returned a persistent 408 Request Timeout. Any thoughts? Where did you get the IP for CallCentric? It seems that if I ping them it comes up with a different IP address on different days or times. After the last round of hits with CallCentric I had to switch one of my customers to Vitelity, they are cheaper and give you an IP to make a gateway with or a registration if you choose. Quote Link to comment Share on other sites More sharing options...
Pablo Posted October 22, 2012 Author Report Share Posted October 22, 2012 Where did you get the IP for CallCentric? It seems that if I ping them it comes up with a different IP address on different days or times. After the last round of hits with CallCentric I had to switch one of my customers to Vitelity, they are cheaper and give you an IP to make a gateway with or a registration if you choose. I found it, here: http://www.callcentric.com/faq/9#254 Quote Link to comment Share on other sites More sharing options...
Pablo Posted October 24, 2012 Author Report Share Posted October 24, 2012 Can you remove your entry 0.0.0.0 [Netmask] 0.0.0.0 and check if Callcentric comes back? I heard they're having some issues lately. Something else, weird, happened yesterday. snom ONE blacklisted one of CallCentric's IP addresses, despite the fact that I specifically permitted access to the PBX to CallCentric's block of IP address (as shown above). The attachment to the e-mail from the system, notifying me of the blacklisted IP address, contained the following: BYE sip:204.11.192.164:5060;ua=fd1d275ae76edf1dc91c85c8b1ab11ae SIP/2.0 v: SIP/2.0/UDP 204.11.192.164:5060;branch=z9hG4bK-a49aeb427dcc684611d20e5bfb9523b5;change=ta f: "Cell Phone WI" <sip:16082890039@204.11.192.132:5074>;tag=as3c8b6d05 t: <sip:18159862626@callcentric.com>;tag=360ead15d4 i: 6f540dd362e2e4a105380648588aca31@204.11.192.132 CSeq: 103 BYE Max-Forwards: 70 l: 0 What am I missing here? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.