MWI on missed calls

[Scootr923]

I have contacted Snom about making the change on the phone. I want to have the MWI flash when the phone rings and when there is a message. The instruction I have been given are below. I applied the XML to the snomONE server and rebooted the phone, NO change. I then applied the http web command, still no change. Please help.

 

Thank you for contacting snom.

 

The LED behavior setting in the snom 320 shows the following:

led_message_usage!: PhoneHasCallInStateRinging PhoneHasMonitoringLineKeyInStateRinging CurrentIdentityHasVoiceMessages PhoneHasVoiceMessages PhoneHasMissedCalls

 

To remove the amber LED on missed calls for the Message LED, please use the following syntax:

led_message_usage!: PhoneHasCallInStateRinging PhoneHasMonitoringLineKeyInStateRinging CurrentIdentityHasVoiceMessages PhoneHasVoiceMessages

 

or XML:

<led_message_usage perm="">PhoneHasCallInStateRinging PhoneHasMonitoringLineKeyInStateRinging CurrentIdentityHasVoiceMessages PhoneHasVoiceMessages</led_message_usage>

 

Or, HTTP Web Command:

http://<PhoneIP>/dummy.htm?settings=save&led_message_usage=PhoneHasCallInStateRinging PhoneHasMonitoringLineKeyInStateRinging CurrentIdentityHasVoiceMessages PhoneHasVoiceMessages

 

If you have questions about the snom ONE configurations specifically, please use the forum.snomone.com website to direct your questions to the snom ONE specialists.

 

Thank you,

The Snom Support Team

- Support Agent -

[Vodia PBX]

I assume that you are using plug and play with snom ONE? Then all you need to do is to edit the template from the web interface of the and add one of those lines above and reboot the phone. You can verify if the PBX really sent that to the phone by taking a look at the "generated" folder in the working directory of the PBX.