sudo Posted April 25, 2013 Report Share Posted April 25, 2013 When I call into the system (AA) with an associated Cell number I get the special prompt to place an outbound call, check voicemail etc. When I place an outbound call it displays the number of the cell phone and not the ANI set in the extensions general settings. Obviously, we want it to display the business number associated with the pbx and not personal cell phone number. Ive looked around the domain and extensions settings and do not see where to modify this. Any advice? Sudo Quote Link to comment Share on other sites More sharing options...
sudo Posted May 14, 2013 Author Report Share Posted May 14, 2013 Anyone? Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted May 15, 2013 Report Share Posted May 15, 2013 That is caused by the trunk header settings. You can put something like {ext-ani} into the from field and that should solve your problem at hand... However it would have negative side effects for calls were you do want to see the original caller-ID (regular twinning). What is necessary is that the PBX erases the current From-header before sending the call out and set it to the From-header that would be used when calling from the extension. We will fix that in the next build. Quote Link to comment Share on other sites More sharing options...
brocs4766 Posted March 10, 2016 Report Share Posted March 10, 2016 We are still having this same issue on version 5.4 if I call my DID press 1 to call out. The call goes out but the remote party receives my cell number with the companies calling name? Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted March 10, 2016 Report Share Posted March 10, 2016 There is a setting in the domain which controls the "DISA" (that is the name of the feature) flag. Check "Use extension ANI for DISA" in the domain settings. Quote Link to comment Share on other sites More sharing options...
brocs4766 Posted March 22, 2016 Report Share Posted March 22, 2016 I changed that setting in the domain still getting the same results Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted March 22, 2016 Report Share Posted March 22, 2016 To get to the bottom of the problem you must look at the INVITE packet which is sent to your SIP trunk provider. Unfortunately it seems that every one reads the standard a different way. You might have to consult the providers documentation on how they want it and even if they support it at all. If the provider is on our drop-down list, it would be great to know if we can improve anything on the header side to make the experience for other users smoother. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.