reco

somebody uses icall here? thanx

hi there, i am trying icall as a did and gateway provider. they have different outbound servers for local and international calls. Inbound: gw01-car.dal.us.icall.net International outbound: gw01-car.dal.us.icall.net Domestic outbound: sbc01-car.dal.us.icall.net I setup 3 trunks: - sip registration inbound only: icall-in - international sip gateway: icall-international - domestic sip gateway: icall-domestic dial plan: icall-international: 011* ⇾ 011* icall-domestic: * ⇾ is this the right way to do it? thanx

hi there, i have a 370 loosing registation with pbxnsip. logging into the phone web interface and clicking re-register on the identity does solve the problem. only reboot will fix it. snom version: snom370-SIP 7.3.26 14999 pbxnsip: 3.4.0.3201 darwin the phone is PnP provisioned with the pbxand sip and has 2 identities configured. any ideas? reco

hi there, is it possible to use google voice as a trunk? anybody tried this? thanx

Nobody had this prob? Crazy

hi there, i have a very simple setup with 3 domains on my server. every domain has it's own sip trunk to the provider - in my case callcentric.com. Some extension from Domain A calls the DID of Domain B -> error from sip provider. Why does pbxnsip not recoginze that this DID exists in the system and simply routs it as an incoming call to the trunk of Domain B? my config: version 3.3.1.3177 (Darwin) i have all trunks set to global. i disabled admin > settings: loopback detection i set an alias with the DID `+2125556666` and `+12125556666` on a AA but still not works. please help!!!

me to i dont like the esupport system. other companies are using it. same thing there. searching either finds to much or nothing. for example i am trying to find out what `Accept Redirect` on the trunk settings mean. i search for `Accept Redirect trunk` the first result is `domain settings` bad

i have setup 6 co lines. if a user pushes the line buttons followed by `X` all lines are indicated in use by the led on the phone. seems like the pbx does not release the line after pressing `X`. After this button press sequence all lines LED's are shown active even though there is no phone call going on. Line1 X (abort) Line2 X (abort) Line3 X (abort) Line4 X (abort) Line5 X (abort) Line 6 X (abort) this is a new behaviour in 3.3.x before when you used a line but aborted it was released right away. any idea?

come one write some good docu for yourself and post it on the wiki... we all share here no? reco

+1

hi pbxnsip the custom wav works. but on the snom wiki its mentioned that its possible to set the internal Ringtones too http://kb.snom.com/kb/index.php?View=entry...&EntryID=28 id didnt work though any idea? think this is more a snom issue: i tried: <?xml version="1.0" encoding="UTF-8" ?> <ringtones> <tone name="alert-internal" type="internal"> <vendor ua="snom.*" type="alert-info"><Ringer7></vendor> </tone> <tone name="alert-external" type="external"> <vendor ua="snom.*" type="alert-info"><Ringer7></vendor> </tone> </ringtones> and <?xml version="1.0" encoding="UTF-8" ?> <ringtones> <tone name="alert-internal" type="internal"> <vendor ua="snom.*" type="alert-info">Ringer7</vendor> </tone> <tone name="alert-external" type="external"> <vendor ua="snom.*" type="alert-info">Ringer7</vendor> </tone> </ringtones> ringtones.xml in http dir, restarted pbx after every change

hi ray any news?

nope inum http://www.inum.net/ i set it up with callcentric reco

hi nexsip i have snom 320 phones so in my tftp dir i have a file called `snom_320_custom.xml` <?xml version="1.0" encoding="utf-8"?> <phone-settings> <holding_reminder perm="RW">off</holding_reminder> </phone-settings> this works for me just fine. reco

hi matt, this look promising thanx!!

hi there, i know skype is closed and proprietary but did anyone manage to somehow connect the pbx to a skype account? i am not really interested in outgoing calling more skype user call me. thanx reco

he pbxnsip, congrats! it just works..... thanx!

i see.... is this something i could install with mac port? thanx

hi pbxnsip On Tab: Admin / PnP I have Trust MAC addresses for PnP: ON I still do not get my phone provisioned after a reset (which deletes login data). I am sure i have the MAC address correct on the registration tab of the Account. thanx christof

see the attachment what options i have in: Admin / Ports / TFTP

this works lovely put this file into tftp dir thanx pbxnsip

hi there, after installing version 3160 provisioning over http authentication works. on your phone webadmin got to Advanced / QoS/Security HTTP Client: User: ext@domain pwd: your pwd after a reset of the phone those settings get deleted. the wiki mentions there is an option `username/password required` which should provision phones based on their mac address without http authentication. i cannot find that option in 3160 and there is not reference on the wiki. thanx christof

Hi there. The phones are on the same subnet than the PBX. Where can I get a 3160 mac binary? Thanx

hi there, i just upgraded to the new version to get INTERCOM working. Unfortunately i am stepping into more other problems. After the upgrade to 3.3.0.3156 the PnP page was totally messed up. I went ahead and deleted the whole directory pnp_parmes and restarted the server. This solved my prob with the PnP page. After i RESET one of my SNOM 320 (firmware 7.3.14) phones its seems to `Checking for Configuration...` and then I have the following message on the display: Prov.request attemp: 20 (counting down till 0) The result is a un-provisioned phone. These phones were provisioning with version pbxctrl-darwin9.0-3.2.0.3143 I also tried to reload the firmware, which worked but still could not get the phone provisioned. I tried this with `Trust MAC addresses for PnP` set to ON and OFF. Still no luck. attached my PnP Page. logfile with http, tftp, SNMP and general events on (Log level 9) voice:~ root# tail -f /Library/Logs/Pbxnsip-error.log [9] 20090311174302: UDP: Opening socket on [::]:49255 [1] 20090311174302: UDP: TOS could not be set [1] 20090311174440: Last message repeated 2 times [5] 20090311174440: Web Server: File snom_3xx.xml not found [2] 20090311174505: load: Index domain not set [2] 20090311174510: Last message repeated 2 times [9] 20090311174510: Remote site closed the connection [9] 20090311174520: Last message repeated 2 times [5] 20090311174520: Web Server: File snom_3xx.xml not found [9] 20090311174520: Remote site closed the connection [9] 20090311174544: Last message repeated 5 times [5] 20090311174544: Web Server: File snom_3xx.xml not found [9] 20090311174616: Remote site closed the connection [5] 20090311174619: Web Server: File tftp/style.css not found [5] 20090311174619: Web Server: File tftp/img/gradient1.gif not found [5] 20090311174619: Web Server: File tftp/img/gradient5.gif not found [5] 20090311174619: Web Server: File tftp/img/login.gif not found [5] 20090311174619: Web Server: File tftp/img/gradient4.gif not found [5] 20090311174620: Web Server: File tftp/img/login_head.gif not found [8] 20090311174620: Remove http session fvmy0fstmmey0s3cjk1a [9] 20090311174649: Remote site closed the connection [8] 20090311174958: HTTP client: Connect to 75.150.83.3:443 [9] 20090311175010: UDP: Opening socket on 0.0.0.0:54734 [9] 20090311175010: UDP: Opening socket on 0.0.0.0:54735 [9] 20090311175010: UDP: Opening socket on [::]:54734 [9] 20090311175010: UDP: Opening socket on [::]:54735 [1] 20090311175010: UDP: TOS could not be set [1] 20090311175010: Last message repeated 2 times [9] 20090311175010: UDP: Opening socket on 0.0.0.0:63376 [9] 20090311175010: UDP: Opening socket on 0.0.0.0:63377 [9] 20090311175010: UDP: Opening socket on [::]:63376 [9] 20090311175010: UDP: Opening socket on [::]:63377 [1] 20090311175010: UDP: TOS could not be set [1] 20090311180452: Last message repeated 2 times [9] 20090311180452: UDP: Opening socket on 0.0.0.0:57836 [9] 20090311180452: UDP: Opening socket on 0.0.0.0:57837 [9] 20090311180452: UDP: Opening socket on [::]:57836 [9] 20090311180452: UDP: Opening socket on [::]:57837 [1] 20090311180452: UDP: TOS could not be set [1] 20090311180452: Last message repeated 2 times [9] 20090311180452: UDP: Opening socket on 0.0.0.0:61332 [9] 20090311180452: UDP: Opening socket on 0.0.0.0:61333 [9] 20090311180452: UDP: Opening socket on [::]:61332 [9] 20090311180452: UDP: Opening socket on [::]:61333 [1] 20090311180452: UDP: TOS could not be set [1] 20090311180529: Last message repeated 2 times [9] 20090311180529: UDP: Opening socket on 0.0.0.0:61200 [9] 20090311180529: UDP: Opening socket on 0.0.0.0:61201 [9] 20090311180529: UDP: Opening socket on [::]:61200 [9] 20090311180529: UDP: Opening socket on [::]:61201 [1] 20090311180529: UDP: TOS could not be set [1] 20090311180529: Last message repeated 2 times [9] 20090311180529: UDP: Opening socket on 0.0.0.0:59168 [9] 20090311180529: UDP: Opening socket on 0.0.0.0:59169 [9] 20090311180529: UDP: Opening socket on [::]:59168 [9] 20090311180529: UDP: Opening socket on [::]:59169 [1] 20090311180529: UDP: TOS could not be set [1] 20090311180913: Last message repeated 2 times [9] 20090311180913: Remote site closed the connection called in support, unfortunately good old christian seems to be the only who knows ;( to less information here: http://wiki.pbxnsip.com/index.php/Release_...3#Plug_and_play thanx reco

ok this fix my prob. but this was only working on 3.3.0.3156 now my phones cannot lead the config of the PnP grrr... but for this i start another topic now. thanx