hosted Posted October 2, 2008 Report Share Posted October 2, 2008 ok I receive a call below.. but the IP is from the router NOT from the original gateway. I am getting this on a couple CS410's here also: (PS IP changed) So im getting 404's unless I make a trunk with the router IP then it works. [0] 2008/10/01 21:32:59: SIP Rx udp:208.187.9.9:5060: <---- IP of gateway INVITE sip:8015063400@208.187.69.69 SIP/2.0 <--- correct Invite Via: SIP/2.0/UDP 66.7.99.99:5060;branch=z9hG4bK45e8aa75;rport <--- correct source From: "DAVID BURR " <sip:8014038529@66.7.99.99>;tag=as12012ea7 ... [5] 2008/10/01 21:32:59: Trunk test sends call to 8015063400 in domain 999.nexsip.com is this a bug? why would it say the router was the source IP? most of the time it works just fine. then suddenly i get 404 errors then it starts working again. This is happening in multiple locations. Quote Link to comment Share on other sites More sharing options...
brandywinetech.com Posted October 2, 2008 Report Share Posted October 2, 2008 are you using both NICS? and if so does ONLY the WAN port have a default gateway ? yori Quote Link to comment Share on other sites More sharing options...
hosted Posted October 2, 2008 Author Report Share Posted October 2, 2008 yes only 1 NIC. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted October 2, 2008 Report Share Posted October 2, 2008 ok I receive a call below.. but the IP is from the router NOT from the original gateway. I am getting this on a couple CS410's here also: (PS IP changed) So im getting 404's unless I make a trunk with the router IP then it works. [0] 2008/10/01 21:32:59: SIP Rx udp:208.187.9.9:5060: <---- IP of gateway INVITE sip:8015063400@208.187.69.69 SIP/2.0 <--- correct Invite Via: SIP/2.0/UDP 66.7.99.99:5060;branch=z9hG4bK45e8aa75;rport <--- correct source From: "DAVID BURR " <sip:8014038529@66.7.99.99>;tag=as12012ea7 ... [5] 2008/10/01 21:32:59: Trunk test sends call to 8015063400 in domain 999.nexsip.com is this a bug? why would it say the router was the source IP? most of the time it works just fine. then suddenly i get 404 errors then it starts working again. This is happening in multiple locations. Well, this is not a bug of the PBX... What router model is it? Maybe it is SIP aware? Check if there is something that you can turn off. Routers do not change IP addresses, unless they are doing NAT. But then they should change it only for outbound traffic, not inbound. Quote Link to comment Share on other sites More sharing options...
hosted Posted October 2, 2008 Author Report Share Posted October 2, 2008 No it is not SIP aware. Just a Microtek. I should also mention im running that beta software. probably should roll back and see what happens. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted October 2, 2008 Report Share Posted October 2, 2008 No it is not SIP aware. Just a Microtek. I should also mention im running that beta software. probably should roll back and see what happens. Even for a beta I would be surprised, as this is a fundamental routing function. But anyway, maybe just try the roll-back version. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.