Jump to content

Snom M3 issue


procision
 Share

Recommended Posts

Hi,

 

I had the Snom M3 running on the early version 3 firmware for the cs410. Upgraded the firmware to 3.1 and now the M3 will not register.

 

I had a look for the old version and but I can't seem to locate it. Any chance of grabbing a copy? or is the a fix for the M3 not registering?

Link to comment
Share on other sites

Hi,

 

I had the Snom M3 running on the early version 3 firmware for the cs410. Upgraded the firmware to 3.1 and now the M3 will not register.

 

I had a look for the old version and but I can't seem to locate it. Any chance of grabbing a copy? or is the a fix for the M3 not registering?

 

Do you have the log from PBX? Just to make sure that the PBX is receiving the registration messages.

Link to comment
Share on other sites

[5] 2009/01/08 06:44:12: Web Server: File m3/settings/0004132a2339.cry not found

[5] 2009/01/08 06:44:12: Web Server: File snom_m3.cry not found

[5] 2009/01/08 06:44:12: Web Server: File m3/settings/0004132a2339.cfg not found

 

Is the basic log.

 

The snoms log.

 

0101070000 [N](01):GMT offset = 21600 seconds

0101070000 [N](09):Registering UA 0 on domain localhost

0101070000 [W](09):Registration of user 42 at UA #0 failed

0108035343 [N](01): Time Synchronized with time server

 

When using Auto Config on firmware 3.1 the registrar on the snom changes back to localhost. If I change the setting, it reverts again on reboot after picking up the config from the pbx. I have been unsuccessful in manually configuring the M3 to connect to the pbx.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...