YMSL Posted February 4, 2009 Report Share Posted February 4, 2009 Hi I have a an Installation that moved from a private IP to a public IP to allow external user to register phones from their house. My problem is that all phone register but the one outside of the company location do not play any audio at all. I've tried to check if ports are open/close and I can see that 5060-5061 are open but 69-close 49152 to 64512 (that are used for audio if I am not mistaking) are closed event on public IP?? From the Internet service provider ? is that possible? Does that make sense and can it be the reason I get no audio at all? Quote Link to comment Share on other sites More sharing options...
pbx support Posted February 4, 2009 Report Share Posted February 4, 2009 Hi I have a an Installation that moved from a private IP to a public IP to allow external user to register phones from their house. My problem is that all phone register but the one outside of the company location do not play any audio at all. I've tried to check if ports are open/close and I can see that 5060-5061 are open but 69-close 49152 to 64512 (that are used for audio if I am not mistaking) are closed event on public IP?? From the Internet service provider ? is that possible? Does that make sense and can it be the reason I get no audio at all? Could be that the firewall on the home routers blocking the traffic. Is there a log file ? also if you have the wireshark trace, please PM to support@pbxnsip.com Quote Link to comment Share on other sites More sharing options...
YMSL Posted February 4, 2009 Author Report Share Posted February 4, 2009 Could be that the firewall on the home routers blocking the traffic. Is there a log file ? also if you have the wireshark trace, please PM to support@pbxnsip.com A complete email has been sent to the requested address. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted February 5, 2009 Report Share Posted February 5, 2009 I have a an Installation that moved from a private IP to a public IP to allow external user to register phones from their house. My problem is that all phone register but the one outside of the company location do not play any audio at all. I've tried to check if ports are open/close and I can see that 5060-5061 are open but 69-close 49152 to 64512 (that are used for audio if I am not mistaking) are closed event on public IP?? From the Internet service provider ? is that possible? Does that make sense and can it be the reason I get no audio at all? It could be a problem with the routing table. It is not uncommon that the OS chooses a different route when you add a second IP address. Sometimes the NIC with the private IP address has a higher bandwidth and the OS thinks it is wise to send all traffic through the NIC with the higher bandwidth. What is the output of the "route" command from the command line? See http://wiki.pbxnsip.com/index.php/One-way_Audio. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.