Jump to content

Exchange UM Breaks after some time


IPNOX

Recommended Posts

Hi there,

 

I'm facing an issue where my Exchange UM feature doesn't work after some time....

Should I call the auto attendent via pbxnsip it would not be resolvable..... or call could not be reached...

 

However, once I re-start the pbxnsip, everything starts working again.....hopefully someone can help :)

 

the following are the logs i have collected:

 

9] 2009/02/15 11:00:45: Resolve 3239: udp 60.48.119.41 27408

[9] 2009/02/15 11:00:46: UDP: Opening socket on port 49410

[9] 2009/02/15 11:00:46: UDP: Opening socket on port 49411

[8] 2009/02/15 11:00:46: Could not find a trunk (3 trunks)

[8] 2009/02/15 11:00:46: Using outbound proxy sip:60.48.119.41:27408;transport=udp because UDP packet source did not match the via header

[9] 2009/02/15 11:00:46: Resolve 3240: udp 60.48.119.41 27408

[9] 2009/02/15 11:00:46: Resolve 3241: udp 60.48.119.41 27408

[8] 2009/02/15 11:00:46: Tagging request with existing tag

[6] 2009/02/15 11:00:46: Sending RTP for OTU3ZDUyZDg2NTFmNmNhMWVmOTQ0NzE0OGZlMGEzMWY.#543094b467 to 10.1.4.103:21990

[9] 2009/02/15 11:00:46: Resolve 3242: udp 60.48.119.41 27408

[7] 2009/02/15 11:00:46: Mailbox prefix ignored because external voicemail in use

[9] 2009/02/15 11:00:46: Dialplan: Evaluating !^2([0-9]*)@.*!sip:2\1@\r;user=phone!i against 2222@pbxnsip.ipnox.com

[5] 2009/02/15 11:00:46: Dialplan All Calls Allowed: Match 2222@pbxnsip.ipnox.com to <sip:2222@tpip-p003s.trainpro-ipnox.net;user=phone> on trunk Exchange 2007 Gateway UM

[5] 2009/02/15 11:00:46: Charge user 1001 for redirecting calls

[8] 2009/02/15 11:00:46: Play audio_moh/noise.wav

[9] 2009/02/15 11:00:46: UDP: Opening socket on port 49276

[9] 2009/02/15 11:00:46: UDP: Opening socket on port 49277

[9] 2009/02/15 11:00:46: Resolve 3243: url sip:tpip-p003s.trainpro-ipnox.net:5060;transport=tcp

[9] 2009/02/15 11:00:46: Resolve 3243: a tcp tpip-p003s.trainpro-ipnox.net 5060

[6] 2009/02/15 11:00:46: Could not determine destination address on 3243

[7] 2009/02/15 11:00:46: Call 6d09b69b@pbx#20953: Clear last INVITE

[5] 2009/02/15 11:00:46: INVITE Response 500 Address Resolution Failed: Terminate 6d09b69b@pbx

[7] 2009/02/15 11:00:46: Other Ports: 1

[7] 2009/02/15 11:00:46: Call Port: OTU3ZDUyZDg2NTFmNmNhMWVmOTQ0NzE0OGZlMGEzMWY.#543094b467

[9] 2009/02/15 11:00:46: Resolve 3244: aaaa udp 10.1.4.100 5060

[9] 2009/02/15 11:00:46: Resolve 3244: a udp 10.1.4.100 5060

[9] 2009/02/15 11:00:46: Resolve 3244: udp 10.1.4.100 5060

[9] 2009/02/15 11:00:46: Resolve 3245: udp 60.48.119.41 27408

[9] 2009/02/15 11:00:46: Resolve 3246: udp 60.48.119.41 27408

Link to comment
Share on other sites

[9] 2009/02/15 11:00:46: Resolve 3243: url sip:tpip-p003s.trainpro-ipnox.net:5060;transport=tcp

[9] 2009/02/15 11:00:46: Resolve 3243: a tcp tpip-p003s.trainpro-ipnox.net 5060

[6] 2009/02/15 11:00:46: Could not determine destination address on 3243

 

Smells like a DNS problem to me... Maybe you can use the IP address in the outbound proxy instead to see if that is the problem. Keep the DNS name in the domain, so that Exchange does not complain.

Link to comment
Share on other sites

Hi IPNOX, :(

 

please try to troubleshoot this at ExchangeUM first, if this is reproduce-able behavior. Please activate UM Diaglostic Logging at Expert Level: http://technet.microsoft.com/en-us/library/bb430783.aspx I prefer the PowerShell steps.

Then wait until the problem comes back. In the event-viewer you might be able to see the cause for the issue in nearly clear text. Please report this errors or warning to me.

 

btw: Please tell me more about you deployment! You should not e.g. run pbxnsip and ExUM on the same machine, or combined with any other SIP-Solutions.

 

sorry for this delayed response, but I can only check the forum every once in a while.

 

regards,

 

Jan :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...