olecoot Posted February 25, 2009 Report Share Posted February 25, 2009 I have a question on the codec settings field in the System Admin >> Ports >> RTP >> Codec Preferences. The list here is not populated with codecs and does not give you the ability to do so (see screen shot attachment). How does this field relate to the codec settings in the pbx.xml file, namely <codec_preference>0 8 9 18 2 3</codec_preference>?? Are the settings in the pbx.xml file used even though they do not show in the System Administration Web Interface? Are the codec settings that would be listed in the System Admin >> Ports >> RTP >> Codec Preferences fields downstream, upstream or both? Also how are these settings (pbx.xml) different from the Override Codec Preference settings in the Trunks? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted February 25, 2009 Report Share Posted February 25, 2009 I have a question on the codec settings field in the System Admin >> Ports >> RTP >> Codec Preferences. The list here is not populated with codecs and does not give you the ability to do so (see screen shot attachment). How does this field relate to the codec settings in the pbx.xml file, namely <codec_preference>0 8 9 18 2 3</codec_preference>?? Are the settings in the pbx.xml file used even though they do not show in the System Administration Web Interface? Are the codec settings that would be listed in the System Admin >> Ports >> RTP >> Codec Preferences fields downstream, upstream or both? Also how are these settings (pbx.xml) different from the Override Codec Preference settings in the Trunks? The new codec selection field is just a glorified JavaScript input form for the gool old list. If you look at the pbx.xml file, you will still see the old list of codec numbers. The change was made to make it easier to select the codec preference. If there is no codec selected (e.g. on the trunk) then that means that the system default should be used. Only in the admin/ports web page there must be at least one codec selected (because that is the default codec preference). Quote Link to comment Share on other sites More sharing options...
olecoot Posted February 25, 2009 Author Report Share Posted February 25, 2009 The new codec selection field is just a glorified JavaScript input form for the gool old list. If you look at the pbx.xml file, you will still see the old list of codec numbers. The change was made to make it easier to select the codec preference. If there is no codec selected (e.g. on the trunk) then that means that the system default should be used. Only in the admin/ports web page there must be at least one codec selected (because that is the default codec preference). So why is the codec list on the admin/ports web page empty? And how do we populate it? Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted February 25, 2009 Report Share Posted February 25, 2009 So why is the codec list on the admin/ports web page empty? And how do we populate it? It should not be empty! What browser are you using? Quote Link to comment Share on other sites More sharing options...
olecoot Posted February 25, 2009 Author Report Share Posted February 25, 2009 It should not be empty! What browser are you using? We use Firefox exclusively. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted February 25, 2009 Report Share Posted February 25, 2009 We use Firefox exclusively. Any chance to quick try to IE? Just for the same to find out if that is the problem. Quote Link to comment Share on other sites More sharing options...
olecoot Posted February 25, 2009 Author Report Share Posted February 25, 2009 Any chance to quick try to IE? Just for the same to find out if that is the problem. After I found a Windoze PC , I tried it. The fields are populated with IE. Can this be fixed for Firefox? Quote Link to comment Share on other sites More sharing options...
pbx support Posted February 25, 2009 Report Share Posted February 25, 2009 After I found a Windoze PC , I tried it. The fields are populated with IE. Can this be fixed for Firefox? It is a cross browser issue. Please send an e-mail to support@pbxnsip.com. We can send you the updated script that solves the issue Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.