Setting destination Extn. for Multiple PSTN Trunks

[Shailesh]

Hi,

I have 2 Analog trunks going into the Sangoma 4 port PSTN Gateway. By default one trunk group was created and calls on both trunks are getting answered and re-directing to the Extn. setup on that trunk.

How do I separate the 2 PSTN lines so that they are treated as as individual lines and can be setup to go to different exentions?

 

Testing on PBXnSIP Ver 4 using the TS12100 Appliance.

 

Any help?

[Vodia PBX]

How do I separate the 2 PSTN lines so that they are treated as as individual lines and can be setup to go to different exentions?

 

This might help: http://forum.pbxnsip.com/index.php?showtopic=5. See also http://kiwi.pbxnsip.com/index.php/Inbound_...s_the_extension (sorry for the old link, I was not able to find it on https://pbxnsipsupport.com.

[mattlandis]

with the patton gateway we've been designating which extension the calls goto from the patton gateway.

 

Frankly, i don't like this and would welcome a way to do it from pbxnsip...

 

Matt

[Shailesh]

Each Channel on the Sangoma Card needs to be handled differently and I don't see any settings in TRUNKS to be able to address individual channels on the Sangoma for inbound.

Any help?

[Vodia PBX]

Each Channel on the Sangoma Card needs to be handled differently and I don't see any settings in TRUNKS to be able to address individual channels on the Sangoma for inbound.

 

You need to use CO-lines for that. It is a little tricky; anyway specifically for NBE we are working on a easy frontend that makes the setup a lot more simple.