tommymtl Posted June 22, 2011 Report Share Posted June 22, 2011 I am usign 4.2.0.3981 (Win32) it's been working fin with a Trunk provider (Trunk1). I am trying to install a second from the same provider (Trunk2). Trunk 2 is working on incoming calls but get forbidden on outgoing calls. Trace are exactly the same except UN et Sip PW Trunk1 and Trunk2 are fully working if programmed on snom 870 but like mentioned trunk2 is getting forbidden I tried to have 1 Trunk at the time only to test further... Trunk1 working 100% but Trunk2 is still getting forbidden on outgoing calls... Any ideas? Quote Link to comment Share on other sites More sharing options...
pbx support Posted June 22, 2011 Report Share Posted June 22, 2011 Does your provider have issues having 2 trunks coming from the same IP, even though they are coming from 2 different user (in this case trunks)? You may have to talk to the provider why they are rejecting the calls on the 2nd trunk. Quote Link to comment Share on other sites More sharing options...
Grenville W Lines Posted September 20, 2011 Report Share Posted September 20, 2011 I am getting the message below. 403 From: URI not recognized (Registration failed, retry after 60 seconds I have several domains with the same trunk provider using the same login credentials and those work fine. I just can't seem to get the latest one working. The calls are rejected. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted September 20, 2011 Report Share Posted September 20, 2011 Can you start a new topic and include the SIP INVITE message that is being sent to the provider? Check out the logging (http://wiki.snomone.com/index.php?title=Logging_SIP_Settings) for that. What provider is it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.