Bymacht Posted August 8, 2011 Report Share Posted August 8, 2011 Hi All, Environment I have connected one PSTN line to FXO port 1 and WAN port to 3Com switch,Snom 320 and Snom 820 is used as two extensions I configured a domain named as testpbx.com and also configured a trunk number using SIP Registration, 2 extension numbers are 573@testpbx.com and 574@testpbx.com we are able to make incoming and outgoing calls internally,and also able to receive incoming calls externally(eg:-a mobile to 573@testpbx.com) But we are unable to make calls from 573@testpbx.com to a mobile number.Not Found Message is showing Is any additional configuration is required fro making outgoing calls. Thanks & Regards Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted August 8, 2011 Report Share Posted August 8, 2011 Are you using the name "localhost" in the PBX as alias name? If not, do you have more than one domain? If you dont use the magic name "localhost", you must be clean with the setting of the domain name in the phone and possibly (if you dont have set the DNS names up right) the outbound proxy. Quote Link to comment Share on other sites More sharing options...
pbx support Posted August 8, 2011 Report Share Posted August 8, 2011 Is any additional configuration is required fro making outgoing calls. Thanks & Regards Do you have the dialplan section configured on the snomONE PBX? Quote Link to comment Share on other sites More sharing options...
Bymacht Posted August 10, 2011 Author Report Share Posted August 10, 2011 Hi All, We are having only one domain name in the pbx,and also no alias name is given for testpbx and no dial plan is set for the domain am also attaching the screen shot of phone Identity which i have configured. Quote Link to comment Share on other sites More sharing options...
katerina Posted August 10, 2011 Report Share Posted August 10, 2011 What about the dialplan? Maybe you should add a prefix? Quote Link to comment Share on other sites More sharing options...
pbx support Posted August 10, 2011 Report Share Posted August 10, 2011 no dial plan is set for the domain If you don't set the dialplan on the PBX (Domain->Settings: Default dial plan), the the outbound calls will not work. Quote Link to comment Share on other sites More sharing options...
Bymacht Posted August 12, 2011 Author Report Share Posted August 12, 2011 Hi All, Thanks it's working now for SIP registrations. But am phasing difficulties while creating a trunk for PSTN lines using FXO port.What all fields are needed to be filled for PSTN trunk number? Quote Link to comment Share on other sites More sharing options...
pbx support Posted August 12, 2011 Report Share Posted August 12, 2011 What are using - CS410 or snomONE plus? If you are using CS410, there is some information here - http://kiwi.pbxnsip.com/index.php/Installing_the_IP-PBX_Appliance#PSTN_gateway_setup Also, http://wiki.snomone.com/index.php?title=Configuring_Trunks talks about configuring the trunks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.