shopcomputer Posted February 21, 2008 Report Posted February 21, 2008 Is anyone using the Pirelli wifi phone with version 2.1.6? Mine stopped working about the time of the 2.1.5 to 2.1.6 upgrade. Outbound calls work. however inbound it rings, however if I try to answer it does not answer it just goes back to the idle screen. If the call is picked up elsewhere e.g. at another phone logged in to the same extension, the Pirelli will continue ringing even after the call is pick up, until I click the ignore button on the phone. Here is the pbxnsip log [0] 2008/02/20 16:01:38: SIP Rx tls:192.168.0.28:2181: PRACK sip:18@192.168.0.10:5061;transport=tls SIP/2.0 Via: SIP/2.0/TLS 192.168.0.28:2056;branch=z9hG4bK-71609n4h8czk;rport From: "Shana " <sip:18@localhost>;tag=rms1z38m2o To: <sip:10@localhost;user=phone>;tag=2ad886fee1 Call-ID: 3c27bd535d71-enyv17r10bz3 CSeq: 2 PRACK Max-Forwards: 70 Contact: <sip:18@192.168.0.28:2056;transport=tls;line=2ahorl0j>;flow-id=1 RAck: 1 1 INVITE Allow: INVITE, ACK, CANCEL, BYE, REFER, OPTIONS, NOTIFY, SUBSCRIBE, PRACK, MESSAGE, INFO Allow-Events: talk, hold, refer, call-info Proxy-Require: buttons Content-Length: 0 [0] 2008/02/20 16:01:38: SIP Tx tls:192.168.0.28:2181: SIP/2.0 200 Ok Via: SIP/2.0/TLS 192.168.0.28:2056;branch=z9hG4bK-71609n4h8czk;rport=2181 From: "Shana " <sip:18@localhost>;tag=rms1z38m2o To: <sip:10@localhost;user=phone>;tag=2ad886fee1 Call-ID: 3c27bd535d71-enyv17r10bz3 CSeq: 2 PRACK Contact: <sip:18@192.168.0.10:5061;transport=tls> User-Agent: pbxnsip-PBX/2.1.6.2448 Content-Length: 0 [0] 2008/02/20 16:01:38: SIP Rx tls:192.168.0.38:2182: SIP/2.0 200 Ok Via: SIP/2.0/TLS 192.168.0.10:5061;branch=z9hG4bK-537f737a2cb8049fae1eeff3d7cb7145;rport= 5061 From: "Shana " <sip:18@localhost>;tag=58061 To: "Nechama " <sip:10@localhost>;tag=gkd9r3qljt Call-ID: c98e4a77@pbx CSeq: 5798 PRACK Contact: <sip:10@192.168.0.38:2065;transport=tls;line=2ahorl0j>;flow-id=1 Content-Length: 0 [5] 2008/02/20 16:01:38: Final transport on 290540 [0] 2008/02/20 16:01:38: SIP Rx udp:192.168.0.24:5060: SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.0.10:5060;branch=z9hG4bK-81df691e26fdb3082513d8e5c060f700;receiv ed=192.168.0.10;rport=5060 From: "Shana " <sip:18@localhost>;tag=27826 To: "Nechama " <sip:10@localhost> Call-ID: a073c51e@pbx User-Agent: Pirelli D910.0.3.99d FS_D910.0.2.83_PIS CSeq: 11786 INVITE Content-Length: 0 [0] 2008/02/20 16:01:39: SIP Rx udp:192.168.0.24:5060: SIP/2.0 180 Ringing Via: SIP/2.0/UDP 192.168.0.10:5060;branch=z9hG4bK-81df691e26fdb3082513d8e5c060f700;receiv ed=192.168.0.10;rport=5060 From: "Shana " <sip:18@localhost>;tag=27826 To: "Nechama " <sip:10@localhost>;tag=3-3516497182 Call-ID: a073c51e@pbx User-Agent: Pirelli D910.0.3.99d FS_D910.0.2.83_PIS CSeq: 11786 INVITE Contact: <sip:10@192.168.0.24:5060;transport=udp> Require: 100rel RSeq: 1 Content-Length: 0 [0] 2008/02/20 16:01:39: SIP Tx udp:192.168.0.24:5060: PRACK sip:10@192.168.0.24:5060;transport=udp SIP/2.0 Via: SIP/2.0/UDP 192.168.0.10:5060;branch=z9hG4bK-7b39b4283864b823e4f0a37ebf9ba2ba;rport From: "Shana " <sip:18@localhost>;tag=27826 To: "Nechama " <sip:10@localhost>;tag=3-3516497182 Call-ID: a073c51e@pbx CSeq: 11787 PRACK Max-Forwards: 70 Contact: <sip:10@192.168.0.10:5060;transport=udp> RAck: 1 11786 INVITE Content-Length: 0 [0] 2008/02/20 16:01:39: SIP Rx udp:192.168.0.24:5060: SIP/2.0 200 Ok Via: SIP/2.0/UDP 192.168.0.10:5060;branch=z9hG4bK-7b39b4283864b823e4f0a37ebf9ba2ba;receiv ed=192.168.0.10;rport=5060 From: "Shana " <sip:18@localhost>;tag=27826 To: "Nechama " <sip:10@localhost>;tag=3-3516497182 Call-ID: a073c51e@pbx User-Agent: Pirelli D910.0.3.99d FS_D910.0.2.83_PIS CSeq: 11787 PRACK Content-Length: 0 [0] 2008/02/20 16:01:40: SIP Rx udp:192.168.0.24:5060: SIP/2.0 200 Ok Via: SIP/2.0/UDP 192.168.0.10:5060;branch=z9hG4bK-81df691e26fdb3082513d8e5c060f700;receiv ed=192.168.0.10;rport=5060 From: "Shana " <sip:18@localhost>;tag=27826 To: "Nechama " <sip:10@localhost>;tag=3-3516497182 Call-ID: a073c51e@pbx User-Agent: Pirelli D910.0.3.99d FS_D910.0.2.83_PIS CSeq: 11786 INVITE Supported: timer,100rel,replaces Session-Expires: 1800;refresher=uac Min-SE: 90 Contact: <sip:10@192.168.0.24:5060;transport=udp> Content-Type: application/sdp Content-Length: 229 v=0 o=Pirelli 2208988817 4 IN IP4 192.168.0.24 s=Pirelli c=IN IP4 192.168.0.24 t=0 0 m=audio 50000 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=sendrecv [0] 2008/02/20 16:01:40: SIP Tx udp:192.168.0.24:5060: ACK sip:10@192.168.0.24:5060;transport=udp SIP/2.0 Via: SIP/2.0/UDP 192.168.0.10:5060;branch=z9hG4bK-b1d883fa9a395d9a51e085f90585c908;rport From: "Shana " <sip:18@localhost>;tag=27826 To: "Nechama " <sip:10@localhost>;tag=3-3516497182 Call-ID: a073c51e@pbx CSeq: 11786 ACK Max-Forwards: 70 Contact: <sip:10@192.168.0.10:5060;transport=udp> Content-Length: 0 [0] 2008/02/20 16:01:40: SIP Tx udp:192.168.0.24:5060: BYE sip:10@192.168.0.24:5060;transport=udp SIP/2.0 Via: SIP/2.0/UDP 192.168.0.10:5060;branch=z9hG4bK-79e3ddb8ac76c9f068b7d4ad6b14e6ad;rport From: "Shana " <sip:18@localhost>;tag=27826 To: "Nechama " <sip:10@localhost>;tag=3-3516497182 Call-ID: a073c51e@pbx CSeq: 11788 BYE Max-Forwards: 70 Contact: <sip:10@192.168.0.10:5060;transport=udp> RTP-RxStat: Dur=3,Pkt=0,Oct=0,Underun=0 RTP-TxStat: Dur=6808121,Pkt=0,Oct=0 Content-Length: 0 [0] 2008/02/20 16:01:41: SIP Rx udp:192.168.0.24:5060: SIP/2.0 200 Ok Via: SIP/2.0/UDP 192.168.0.10:5060;branch=z9hG4bK-79e3ddb8ac76c9f068b7d4ad6b14e6ad;receiv ed=192.168.0.10;rport=5060 From: "Shana " <sip:18@localhost>;tag=27826 To: "Nechama " <sip:10@localhost>;tag=3-3516497182 Call-ID: a073c51e@pbx User-Agent: Pirelli D910.0.3.99d FS_D910.0.2.83_PIS CSeq: 11788 BYE Content-Length: 0 [5] 2008/02/20 16:01:41: BYE Response: Terminate a073c51e@pbx Quote
Vodia PBX Posted February 21, 2008 Report Posted February 21, 2008 RTP-TxStat: Dur=6808121,Pkt=0,Oct=0 Ouch. Hmm. I think I am using the same device from the same manufacturer, no problems... Can you set the codecs on the Pirelli or the PBX to use only one codec? Maybe that helps to track the problem down... Quote
shopcomputer Posted February 21, 2008 Author Report Posted February 21, 2008 I did set the default codec to g711u on pirelli end to g711u. Can it have anything to do with alert info Ring tones, the only other thing I did other than upgrade was played with the custom4 ringtone in the ringtones.xml file. Quote
Vodia PBX Posted February 21, 2008 Report Posted February 21, 2008 I did set the default codec to g711u on pirelli end to g711u. Can it have anything to do with alert info Ring tones, the only other thing I did other than upgrade was played with the custom4 ringtone in the ringtones.xml file. Did you set it to use only g711u? Currently it answeres with multiple codecs, and that is a common source for problems. Quote
shopcomputer Posted February 21, 2008 Author Report Posted February 21, 2008 The pbxnsip is set to 0 8 18 2 3, the Pirelli was set preffered codec g729, I changed it to g711u. I don't recall seeing a setting to restrict to g711 only preffered, although I will double check next time I am at the clients location. Should I change the pbxnsip to 0 only? Broadvox the ITSP as well as the audiocodes gateway, snom, polycom and aastra phones we use all support G711u. Quote
Vodia PBX Posted February 21, 2008 Report Posted February 21, 2008 Should I change the pbxnsip to 0 only? I would give that a try for the sake of finding out if that is the problem. Then we can decide what to do with it. Quote
Guest Paul McCabe Posted February 28, 2008 Report Posted February 28, 2008 Moishe, did you get the Pirelli working properly yet? I just received a DP-L10 phone and it exhibits the exact same symptoms as yours. Quote
shopcomputer Posted February 28, 2008 Author Report Posted February 28, 2008 Not yet, I did not want to disable all unused codecs remotely, and I did not visit the client since. it does work fine with version 2.1.5, so you can downgrade and get it working. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.