hosted Posted April 17, 2007 Report Share Posted April 17, 2007 how would i set up the inbound routing to look for a extension. if it match's ring it if not then ring the Auto Attendant? Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted April 17, 2007 Report Share Posted April 17, 2007 Check out http://wiki.pbxnsip.com/index.php/Inbound_Calls_on_Trunk. For example, you can use a pattern like !(.*)!\1!u!123! to default to auto attendant 123. Quote Link to comment Share on other sites More sharing options...
dcjm Posted June 15, 2007 Report Share Posted June 15, 2007 I have a client with 2 DID #s. One is a voice line which goes directly to auto attendant. The second line is a dedicated fax line (which currently is also going to the auto attendant). I would like setup the PBX to continue to route the voice line to the auto attendant but have the fax route directly to a Grand stream HandyTone -386 device. I took a look at the suggested link in the above post but wasn't sure if it would address this scenario. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted June 15, 2007 Report Share Posted June 15, 2007 I think that situation can be solved very easily by using a alias name for the fax that matches the DID number. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.