Jump to content

Snom M700 auto provision


Recommended Posts

Here is the document I am using to configure

 

https://vodia.com/documentation/snom_m700.pdf

 

 

Here are some logs from the M700 base

 

loc2 .Debug 1970-01-01T00:00:00Z 173-[ Loader status at boot: ff ff ff ff ff ]
NWK .Info 1970-01-01T00:00:01Z 173-[ ETH: Link down]
loc5 .Warn 1970-01-01T00:00:01Z 173-[ Link down on eth0]
loc3 .Debug 1970-01-01T00:00:01Z 173-[ SrtpInit]
NWK .Info 1970-01-01T00:00:04Z 173-[ ETH: Link up]
loc5 .Not 1970-01-01T00:00:04Z 173-[ Link up on eth0]
loc5 .Not 1970-01-01T00:00:04Z 173-[ Running 100Mb/s on eth0]
loc5 .Not 1970-01-01T00:00:04Z 173-[ DSP module not detected.]
NWK .Info 1970-01-01T00:00:07Z 173-[ ETH: Delta Link down/up 3s]
NWK .Info 1970-01-01T00:00:07Z 173-[ ETH: Running 100Mb/s]
NWK .Debug 1970-01-01T00:00:07Z 173-[ FNS_IF_EVENT_ADDRESS_READY]
NWK .Debug 1970-01-01T00:00:07Z 173-[ SIP_SERVER_OPTION#120 Not Found]
NWK .Info 1970-01-01T00:00:07Z 173-[ DHCP Enabled]
NWK .Info 1970-01-01T00:00:07Z 173-[ IP Address: 192.168.10.185]
NWK .Info 1970-01-01T00:00:07Z 173-[ Gateway Address: 192.168.10.1]
NWK .Info 1970-01-01T00:00:07Z 173-[ Subnet Mask: 255.255.255.0]
NWK .Debug 1970-01-01T00:00:07Z 173-[ TFTP boot server not set by DHCP. Using Static.]
NWK .Info 1970-01-01T00:00:07Z 173-[ DHCP Discover completed]
loc3 .Info 1970-01-01T00:00:08Z 173-[ Certificate issued for "MAC_ADDRESS_OF_M700" by "Snom Technology AG"]
loc3 .Info 1970-01-01T00:00:08Z 173-[ Firmware Version 03.55 Branch 0016]
loc3 .Info 1970-01-01T00:00:08Z 173-[ MAC=MAC_ADDRESS_OF_M700, SER= 00000, HW=255]
loc3 .Info 1970-01-01T00:00:08Z 173-[ Stun detection disabled]
loc5 .Not 1970-01-01T00:00:08Z 173-[ Running 100Mb/s on eth0]
loc3 .Debug 1970-01-01T00:00:08Z 173-[ LDAP: TCP Ready]
loc5 .Not 1970-01-01T00:00:09Z 173-[ SIPSIP: hUa#980f11 relation to UA#30 created]
loc3 .Info 1970-01-01T00:00:09Z 173-[ RemCfg: Time not set yet - deferring provisioning]
loc5 .Not 1970-01-01T00:00:10Z 173-[ [10] Trel accept called from task 7]
loc5 .Not 1970-01-01T00:00:10Z 173-[ [10] Trel TrelAccept success. Listening on port 10010]
loc0 .Info 1970-01-01T00:00:11Z 173-[ DECT master mode]
loc3 .Info 1970-01-01T00:00:19Z 173-[ RemCfg: Time not set yet - Provisioning using TLS might not work]
loc3 .Info 1970-01-01T00:00:19Z 173-[ RemCfg: Checking for settings]
loc3 .Info 1970-01-01T00:00:19Z 173-[ RemCfg: Attempting fetch of file: tftp://ADDRESS_OF_PBX/snomM700.htm]
loc6 .Crit 1970-01-01T00:00:28Z 173-[ Critical Slow DNS answer time: 9s]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Error loading file]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Attempting fetch of file: tftp://ADDRESS_OF_PBX/snomM700-MAC_ADDRESS_OF_M700.htm]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Error loading file]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Attempting fetch of file: tftp://ADDRESS_OF_PBX/snomM700-firmware.htm]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Error loading file]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Attempting fetch of file: http://ADDRESS_OF_PBX/snomM700.htm]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Error loading file]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Attempting fetch of file: http://ADDRESS_OF_PBX/snomM700-MAC_ADDRESS_OF_M700.htm]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Error loading file]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Attempting fetch of file: http://ADDRESS_OF_PBX/snomM700-firmware.htm]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Error loading file]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Attempting fetch of file: https://ADDRESS_OF_PBX/snomM700.htm]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Error loading file]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Attempting fetch of file: https://ADDRESS_OF_PBX/snomM700-MAC_ADDRESS_OF_M700.htm]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Error loading file]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Attempting fetch of file: https://ADDRESS_OF_PBX/snomM700-firmware.htm]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Error loading file]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: No setting server offered via SIP PNP]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: No setting server offered in DHCP]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Provisioning completed]
loc3 .Info 1970-01-01T00:00:28Z 173-[ UpdateAllTimestamps]
loc3 .Info 1970-01-01T00:00:28Z 173-[ RemCfg: Attempting fetch of file: ]
Auth .Info 1970-01-01T00:00:28Z 173-[ No flash certificates found]
loc6 .Info 1970-01-01T00:00:28Z 173-[ Multi cell Disabled]
loc2 .Debug 1970-01-01T00:00:28Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:00:28Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc7 .Info 1970-01-01T00:00:29Z 173-[ DECT Mode: US]
loc7 .Info 1970-01-01T00:00:29Z 173-[ System Mode: (a4/51)]
loc7 .Info 1970-01-01T00:00:29Z 173-[ Normal Reboot]
loc7 .Info 1970-01-01T00:00:29Z 173-[ DECT protocol delay timer started (single cell)]
loc6 .Crit 1970-01-01T00:00:37Z 173-[ Critical Slow DNS answer time: 9s]
loc3 .Info 1970-01-01T00:00:37Z 173-[ RemCfg: Error loading file]
loc3 .Info 1970-01-01T00:00:37Z 173-[ RemCfg: Provisioning PhoneBook completed]
loc2 .Debug 1970-01-01T00:00:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc7 .Info 1970-01-01T00:00:44Z 173-[ DECT protocol activated, delay passed (single cell)]
loc2 .Debug 1970-01-01T00:01:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:01:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:02:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:02:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:03:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:03:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:04:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:04:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:05:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:05:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:06:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:06:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:07:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:07:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:08:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:08:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:09:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:09:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:10:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:10:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:11:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:11:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:12:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:12:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:13:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:13:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:14:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:14:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:15:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:15:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:16:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:16:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:17:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:17:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:18:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:18:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:19:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:19:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:20:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:20:38Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]
loc2 .Debug 1970-01-01T00:21:08Z 173-[ PP FWU mail handler FWU_UPDATE_PP_INFOS]

Link to comment
Share on other sites

Do you have an M700 in house to test on and can you verify that it is working? I see in the release notes for PBX 5.2.5 it says that support was added for M700.

 

https://vodia.com/doc/releasenotes525

 

What level of support for automatic provisioning of the snom M700 does the PBX support? Can I expect that I can deploy an M700 the same way I deploy a Snom 720?

Link to comment
Share on other sites

The M700 is also provisioned automatically, though we could not figure out how to tell the device how to associate a specific handset with a specific SIP ID. Compared to the desktop phones, there is comparatively less experience with the M700. Also we did not get multiple cells, we could provision only one cell.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...