McFone Posted May 28, 2017 Report Share Posted May 28, 2017 Hi, we want to get a other snom TAPI drivers for CTI to work, but we need user level access not admin access to the phone with PNP is a user level provision ? In the config file we found not the right data to access as user level in the phone. <http_client_user perm="RW">xxxxxxxxx</http_client_user> <http_client_pass perm="RW">xxxxxxxxx</http_client_pass> <user_pass idx="1" perm="RW">xxxxxxxx</user_pass> <http_user perm="RW">admin</http_user> <http_pass perm="RW">xxxxxxxxxxxx</http_pass> <ldap_password>xxxxxxxxxxx</ldap_password> <user_host idx="1" perm="RW">xxxxxxxxxxxxxxxx</user_host> <user_pass idx="1" perm="RW">xxxxxxxxxxx</user_pass> thanks Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted May 29, 2017 Report Share Posted May 29, 2017 You need the web password for CSTA (which TAPI is using). I am not sure if that password is provisioned into the phone. If you need it you could include a dummy setting and set it to {web-pass}. Quote Link to comment Share on other sites More sharing options...
Henrikt Posted May 29, 2017 Report Share Posted May 29, 2017 If you want to use 3-party CTI for the Snom Phones you only need to change this pnp for the Snom phones under templates <http_user perm="RW">admin</http_user> <http_pass perm="RW">password</http_pass> It works for me Quote Link to comment Share on other sites More sharing options...
McFone Posted May 30, 2017 Author Report Share Posted May 30, 2017 Hi, thanks for answer We can change this in the template and all user with the same phone have after PNP this account credits For the assignment of the TAPI drivers we need for each user different accounts the webaccess is not working for the phone maybe we have a misunderstanding. CTI is not well supported from Vodia the TAPI driver work not stable with limited features and associated with too much support with customers and in the end we give up. The manufacturers of CTI solution support CSTA but not the Vodia PBX and give no support! https://www.c4b.com/de/index.php https://www.estos.de/ http://www.caseris.de/produkte/cti/ For every tip who knows a solution that works I am very happy We are trying to setup that CTI solution http://phonesuite.de/ have TAPI for snom and yealink the solution is not to big very smart and inexpensive. thanks Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted May 31, 2017 Report Share Posted May 31, 2017 Accessing the phone is a different thing that accessing the web interface of the PBX. For the phone, you will use the username/password set in the PnP section of the domain. This is the same for all phones in the domain. Accessing the web interface of the PBX for the user will use the username and the web password for that account. This is the one that is also used for CSTA. I would not roll out any new TAPI. IMHO this is a technology of the past. Everything is now HTTP. CTI integration is massively moving this direction. In a nutshell it means using ActionURL and REST API. Quote Link to comment Share on other sites More sharing options...
McFone Posted June 1, 2017 Author Report Share Posted June 1, 2017 Hi, our solution until the HTTP and co take over the TAPI Estos The new ECSTA 5 Release contains driver for yealink and snom ;-) https://download.estos.de/download?ecsta__de-DE_releasenotes_2&checksum=609388f915fc49d28df79013edc3701434bd6331 and only TAPI Driver for TAPICALL etc. we use driver from http://www.phonesuite.de/ also available for yealink and snom yealinks and snom phones are well supported with this solution. Quote Link to comment Share on other sites More sharing options...
Henrikt Posted June 3, 2017 Report Share Posted June 3, 2017 Hi, Have you tryed to change the pnp in the customize under the extensions. Here you can make difference password for each phones. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.