Jump to content

Multicast Paging


Recommended Posts

As long as all the phones are provisioned to the same PBX and have picked up the paging multicast IP address in their configuration, and are accessible behind NAT or via the IP Routing list configuration, the multicast paging should work. The other office's network should be open for receiving the page on that IP:PORT. This will load your network for sure.

Link to comment
Share on other sites

Multicast is a special way to transport messages in the Internet. In the LAN this is mapped to a broad cast, but if you want to send messages out into different segments you need to program your router accordingly. Hint: This is not trivial. But there is plenty information about multicast in the Internet that can help you getting this done.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...