lieveluc Posted October 22, 2009 Report Share Posted October 22, 2009 Does any one has experience with using a Lancom 1722 as SIP Gateway for Pbxnsip? If yes, please provide instructions Thanks Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted October 23, 2009 Report Share Posted October 23, 2009 Does any one has experience with using a Lancom 1722 as SIP Gateway for Pbxnsip? If yes, please provide instructions I just looked at their documentation (never had the device). I believe it should be easy to get this working. Probably you just have to use a gateway trunk to the device. Do you have one? Maybe if you can PM the access information to the gateway and the PBX we can try it remote. Quote Link to comment Share on other sites More sharing options...
lieveluc Posted October 29, 2009 Author Report Share Posted October 29, 2009 Hi i need some help here regarding the configuration of the Trunk within pbxnsip and for the SIP Gateway. In my network pbxnsip does have the ip address 15.137.40.40 and the lancom 1722 Gateway 15.137.40.2 How should i configure the Trunk within pbxnsip? I used following settings without success: Name: test Type: SIP Gateway Direction: Inbound and outbound Domain: 15.137.40.2 Username: pbxnsip Password: test All other parameters are default. Did i forget something? Thanks for your support Quote Link to comment Share on other sites More sharing options...
pbx support Posted October 31, 2009 Report Share Posted October 31, 2009 Hi i need some help here regarding the configuration of the Trunk within pbxnsip and for the SIP Gateway. In my network pbxnsip does have the ip address 15.137.40.40 and the lancom 1722 Gateway 15.137.40.2 How should i configure the Trunk within pbxnsip? I used following settings without success: Name: test Type: SIP Gateway Direction: Inbound and outbound Domain: 15.137.40.2 Username: pbxnsip Password: test All other parameters are default. Did i forget something? Thanks for your support Also set the outbound proxy as 15.137.40.2 Quote Link to comment Share on other sites More sharing options...
lieveluc Posted October 31, 2009 Author Report Share Posted October 31, 2009 I added as outbound proxy 15.137.40.2 but it still does not work. Quote Link to comment Share on other sites More sharing options...
pbx support Posted November 2, 2009 Report Share Posted November 2, 2009 I added as outbound proxy 15.137.40.2 but it still does not work. Any more details? Do you have a SIP trace for the call? Make sure to enable SIP logging before you take the trace - https://www.pbxnsipsupport.com/index.php?_m...;kbarticleid=58 Quote Link to comment Share on other sites More sharing options...
lieveluc Posted November 8, 2009 Author Report Share Posted November 8, 2009 Thanks for the tips - i was able to get it working. The Lancom device runs smoothly with Pbxnsip Quote Link to comment Share on other sites More sharing options...
pbxuser911 Posted November 8, 2009 Report Share Posted November 8, 2009 what was done wrong? any tips for anyone who will be setting one up? Quote Link to comment Share on other sites More sharing options...
catprotec Posted May 7, 2010 Report Share Posted May 7, 2010 Hi lieveluc, can you post your configuration please - i have exactly the same problems getting it working. My device is a Lancom 1724. ( 192.168.10.1 - the PBX is 192.168.10.60 ) Configuration: Type: SIP Gateway Direction : inbound and outbound Account: 10000 Domain: 192.168.10.1 Username : 10000 Password: xxxxxx Outbound proxy: 192.168.10.1 CO Lines: 10000 add all Codecs within the lancom i have a SIP line: Modus: Gateway SIP-Domain/Realm: 192.168.10.60 Registrar : 192.168.10.60 Port 5060 Registering true SIP-ID/User : 10000 Authentication Name: 10000 PW xxxxx doesn't work: [5] 2010/05/07 14:42:34: SIP Rx udp:192.168.10.1:11488: REGISTER sip:192.168.10.60 SIP/2.0 Via: SIP/2.0/UDP 192.168.10.1:11488;branch=z9hG4bK-b5596682-926b3f35 From: "10000"<sip:10000@192.168.10.60>;tag=714598764-965850638 To: "10000"<sip:10000@192.168.10.60> Call-ID: 10000-protec.intern-f1cdea3e@00a05711fc12 CSeq: 11 REGISTER Allow: REGISTER, INVITE, ACK, CANCEL, BYE, REFER, NOTIFY, OPTIONS Max-Forwards: 70 Contact: <sip:10000@192.168.10.1:11488> Expires: 60 User-Agent: LANCOM 1724 VoIP (Annex B ) / 7.80.0081 / 06.01.2010 Content-Length: 0 [5] 2010/05/07 14:42:34: SIP Tx udp:192.168.10.1:11488: SIP/2.0 404 Registration Not Possible Via: SIP/2.0/UDP 192.168.10.1:11488;branch=z9hG4bK-b5596682-926b3f35 From: "10000" <sip:10000@192.168.10.60>;tag=714598764-965850638 To: "10000" <sip:10000@192.168.10.60>;tag=bc7e00dcbb Call-ID: 10000-protec.intern-f1cdea3e@00a05711fc12 CSeq: 11 REGISTER Retry-After: 3600 Content-Length: 0 The status monitor of the LANCOM always says: Line 10000 - Registration attempt Have you any hints for me ? Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted May 7, 2010 Report Share Posted May 7, 2010 If you want to register, you have to use an extension not a trunk for the device. The PBX accepts only registrations from extensions. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.